03-17-2019, 06:13 PM | #491 |
Drives: 2018 ZL1 Garnet Red Tintcoat A10 Join Date: Jan 2019
Location: NY
Posts: 537
|
They do look very nice and sleek. On the rear. They aren't going to be large like a pick up truck. I am curious how much they protect. It is not gonna stop it all but it should help a considerate amount.
MeSoHappy did you give them any feedback on them and how they fit? Do you think that they are good enough? |
03-17-2019, 10:41 PM | #492 | |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
Quote:
I also told him “I thought they’d be bigger”. “A bit bigger would be nice”. His response: Great to hear... yes, bigger would be great, but would have looked like a truck guard. And it needed to match the front. Thanks for your help. They will be active on the site at the regular price. The preorders will get an email Monday from us with the 20$ discount into the check out. Regards, Joseph Taverna I think they will protect the rockers. They will protect some of the lower hip. They will not protect like the ZL1 ADDONS but they fit and install way better. I like them. I like the look. I like the fit. When doing burnouts for drag racing, the ZL1 ADDONS didn’t help much either. That rubber gets everywhere. My opinion is they finish the looks of the car perfectly. I’m ecstatic about that! But bigger wouldve been nicer for functionality. Let’s temember though, when we all signed up fir the fronts, we knew we were getting the ZL1 version of the SS flaps they already make. That’s what these are. Hope this helps.
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
|
|
03-17-2019, 11:10 PM | #493 |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
See if these are turned right way.
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
|
03-18-2019, 10:23 AM | #494 |
Drives: Nothing Special Join Date: Mar 2019
Location: South Jersey
Posts: 31
|
I would love to get on the list for a group purchase for the front & rear. Any suggestions would be appreciated, thanks!
|
03-18-2019, 10:54 AM | #495 |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
Added to list.
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
|
03-18-2019, 10:55 AM | #496 |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
Added to list.
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
|
03-18-2019, 11:00 AM | #497 | |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
Quote:
List updated. Here is link to order fronts: https://acscomposite.com/discount/*********ZL1?redirect=%2Fproducts%2Fzl1-rock-chip-guards
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
Last edited by meSSohappy; 03-18-2019 at 06:10 PM. |
|
03-18-2019, 11:06 AM | #498 |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
ACS will be sending emails, this week, to everyone who has ordered the fronts. It will include a link, with the discount, to order the rears.
They are also on the ACS website at regular price. Not sure how much longer this discount will apply. I will find out and post. Thanks to all of you who helped me pull this together ! Its been almost 9 months since we started this interest list...shit don't happen overnight...lol Thanks to ACS for following through on their promise and producing another spectacular product ! Please let me know your thoughts and post pics when you get them installed.
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
Last edited by meSSohappy; 03-18-2019 at 11:16 AM. |
03-18-2019, 11:50 AM | #499 | |
Drives: 2018 Nightfall Gray Metalic ZL1 A10 Join Date: Feb 2018
Location: SFLA
Posts: 154
|
Quote:
Cheers to all of us early buyers for getting the ball rolling IMHO I am totally OK with the amount they stick out. I agree with ACS that any more and it would have looked like a trucks mud guards. Cant wait for my email to come through |
|
03-18-2019, 01:27 PM | #500 |
Just ordered my rears!!!! Way to go guys!!! These are gonna look awesome!!
|
|
03-18-2019, 01:55 PM | #501 |
Drives: 2017 ZL1 10 Speed Hyper Blue Join Date: Jul 2016
Location: Canada
Posts: 1,349
|
Just ordered mine!
__________________
2017 ZL1
|
03-18-2019, 01:59 PM | #502 |
Drives: 18' A10 ZL1 , 18' F150, 04' MSM Join Date: May 2018
Location: Bay Area, California
Posts: 178
|
Got the email for the rears, and ordered. I've been waiting to install the fronts but looks like I'll be able to get them all on now!
Thanks for putting this together. |
03-18-2019, 02:15 PM | #503 |
AXLERODZL1
Drives: 2019 Riverside blue ZL1 Camaro Join Date: Dec 2018
Location: Carrollton, VA
Posts: 205
|
ordered the rears!!
__________________
'19 ZL1 A10 Riverside Blue PDR/Nav/Sunroof
Kong ported blower/snout Roto-Fab Big gulp 103 TB Lingenfelter Lower Pulley(9.17) 1 7/8 ARH headers and Exhaust Meth injection(single nozzle) 733whp/788tq |
03-18-2019, 02:15 PM | #504 |
Drives: 2018 Nightfall Gray Metalic ZL1 A10 Join Date: Feb 2018
Location: SFLA
Posts: 154
|
got email, placed order, discount applied...….= Happy
|
|
|
Post Reply
|
|
|