10-20-2019, 09:45 AM | #127 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Wanna bump this thread looking for a complete set of clips and bobbins from 2 pc rotors.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-20-2020, 08:34 AM | #128 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Does anyone know the nominal thickness of the C7 rotors from DBA???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-20-2020, 02:08 PM | #129 |
Drives: '19 RivrsdBlu 1LE ('17 1LE HB sold) Join Date: Nov 2016
Location: Seattle
Posts: 1,686
|
IIRC, KNS brakes sell some hardware for the DBA rotors for OEM hats. You may want to contact with them to make sure
__________________
|
01-21-2020, 04:13 AM | #130 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
They don’t have the clips and bobbins, Ken has the nuts an bolts though.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-21-2020, 08:17 PM | #131 |
|
|
01-21-2020, 08:54 PM | #132 | |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
Quote:
|
|
01-22-2020, 04:56 AM | #133 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Thanx for the measurements!!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-26-2020, 08:52 AM | #134 |
|
Yes but we were talking about the DBA rings, not OEM rotor assemblies.
|
01-21-2021, 07:55 PM | #135 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Been a long time anyone got more info or actually done it?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-24-2021, 03:13 PM | #136 |
|
|
01-24-2021, 10:38 PM | #137 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
so i had the dba rings,
don't know if it had to do with the balancing after transferring the hats over or what.. but i had terrible hot spots and a terrible like clicking/vibration at speed, put a set of stock rotors on and it all went away.... i wanted to see how to buy the rotors that come on the Chevy upgrade kit that are slotted but couldn't find a part number for just the rotors..
__________________
2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp
Jannetty Motorsports tuned |
01-24-2021, 11:01 PM | #138 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Kinda info I was looking for.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-25-2021, 04:46 AM | #139 |
Drives: 2018 1SS 1LE Join Date: Dec 2012
Location: NY
Posts: 395
|
Have the DBA’s on my 1LE. No problems to report !
|
01-25-2021, 05:33 AM | #140 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,200
|
I did them on my Gen5 with the 6 pistons. No problems at all. I believe they are a slightly better rotor than the Gen5 ZL1 2 piece.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
|
|
Post Reply
|
|
|