[FNxR3DNECK]

Originally Posted by eimarshall

Have you run anything more than auto-X? I worry about the 305 on 10” combo for possible road course or track work. I really like the RS4s though.

I run the RS4s on a square set of 19x10.5" wheels for the track, but they run slightly skinnier than other 305s and TireRack says they are good for 10'12" wheels. I trust TireRack so I wouldn't be too stressed about running them on 10" wide fronts, I just went went with the setup that would allow me to rotate them.

[eimarshall]

Gotcha. Thanks!

[ICTsccaCamaro]

Originally Posted by eimarshall

Have you run anything more than auto-X? I worry about the 305 on 10” combo for possible road course or track work. I really like the RS4s though.

I run 325/30R19's on a set of 19x10's and 19x11's off my old 5gen 1LE for track use and have no issue running 140+ down the straights and braking at the limit, 305's on a 10 would defiantly not be an issue.

[eimarshall]

Cool. Thanks for the info guys. Now i just gotta find some wheels. Anyone got any suggestions for stock SS 1le width in 19s? I have a set of apex for dd duty, having a hard time justifying $750 per wheel for forged stuff over Apex or some other roll forged brands.

[ICTsccaCamaro]

Originally Posted by eimarshall

Cool. Thanks for the info guys. Now i just gotta find some wheels. Anyone got any suggestions for stock SS 1le width in 19s? I have a set of apex for dd duty, having a hard time justifying $750 per wheel for forged stuff over Apex or some other roll forged brands.

Just have Forgestar make your a set in your spec, I believe mine were about $1600 a few years back

[Apex_Missing_Ape]

Originally Posted by eimarshall

Cool. Thanks for the info guys. Now i just gotta find some wheels. Anyone got any suggestions for stock SS 1le width in 19s? I have a set of apex for dd duty, having a hard time justifying $750 per wheel for forged stuff over Apex or some other roll forged brands.

Did you buy Apex's new Camaro-specific 19s? Factory 1LE offsets and widths, plus you don't need hub rings. That's what I'm putting new tires on for track duty. They are about 7-8lb lighter per wheel, which is pretty awesome.

https://www.camaro6.com/forums/showthread.php?t=551335

[eimarshall]

Unfortunately no. I bought their bmw spec set in 2017. They are just 19x10 with all seasons for DD duty. Im not quite in the market yet for a full track set. Trying to burn through the stockers via autocross this summer. Then I’ll justify selling the oems and dropping to 19s.

I think i got forgeline and forgestar mixed up. The forgestars are right in line with Apex. Forgeline are not....

[Apex_Missing_Ape]

Well, I actually did end up going with the R888Rs. They got really good reviews on various forums plus Walmart has them for cheap! 295/30/19s are only $281 and 305/30/19 was $345 (edit - $364). I could've gone with a square 295 setup for cheap but went ahead and went staggered. Provided my wheels come in by second week of June I'll be able to test them at Barber MSP.