11-19-2018, 11:20 AM | #29 |
How are the fenders holding up to the added spacers?
__________________
|
|
11-19-2018, 11:21 AM | #30 |
Drives: 2016 SS Mosaic Black Join Date: Jul 2012
Location: Murfreesboro, TN
Posts: 438
|
Just like day 1.
|
11-19-2018, 06:17 PM | #31 |
Awesome, debating on the skirts for my car when I came across this article. Been putting it off for too long lol....it's a debate between OEM ZL1 skirts and ACS ZL1 to go with the rear brake vents
__________________
|
|
11-19-2018, 06:28 PM | #32 |
Drives: 2016 SS Mosaic Black Join Date: Jul 2012
Location: Murfreesboro, TN
Posts: 438
|
If you do decide to go with aftermarket items, hit me up. I'm the owner of overkillautogarage.com
|
11-19-2018, 07:07 PM | #33 |
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,766
|
Now replace rust prone plain steel washers w nylon spacer from same section of hardware store.
__________________
ing for grip.
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
11-19-2018, 07:47 PM | #34 |
Drives: 2016 SS Mosaic Black Join Date: Jul 2012
Location: Murfreesboro, TN
Posts: 438
|
Yes that, stainless steel or aluminum
|
05-05-2019, 02:29 PM | #35 |
Drives: Camaro SS 2018 Convertible Join Date: Apr 2019
Location: Switzerland
Posts: 115
|
hello...
well done.. does someone maybe have some pictures showing closer the door and the fender ? Is the gap between them from the top to the bottom the same? does someone know what the difference is between "Type 1" and "Type 2" ? (see attached picture). and what about the other parts? Do i need to order them as well? Sorry for my beginner english.. my native language is swiss german.. :-) |
05-08-2019, 08:09 PM | #36 |
Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016
Location: The Beach, NC
Posts: 603
|
Hello!
I just completed this using this write up but instead used nylon washers and stainless bolts and nuts. Thank you for all the good info burningrice! Bereic, I’ll try an post some pics of the gap at the fender and door from top to bottom. It does close a tiny bit at the bottom, but nothing that bothers me. Also, you need these part numbers only: 84491863 and 84491864. All the rest you see came with them. The clips were pre mounted and the weather stripping came in the box.
__________________
'16 2SS, M6, Borla Atak |
05-09-2019, 12:49 AM | #37 |
Drives: Camaro SS 2018 Convertible Join Date: Apr 2019
Location: Switzerland
Posts: 115
|
Thanks AdmAnt13
But how do you now have different part numbers? Comparing the ZL1 and the SS in the online catalogue the Type 1 appears to be the normal skirts. As the part numbers with "Type 1" 23399023 and 23399024 are the same as on the SS selection. The ZLI skirts are showing the numbers 84177432 and 84177431. Thank you |
05-14-2019, 06:03 PM | #38 | |
Drives: Camaro SS 2018 Convertible Join Date: Apr 2019
Location: Switzerland
Posts: 115
|
Quote:
And from where did you get your part numbers? thank you |
|
05-14-2019, 06:21 PM | #39 |
Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016
Location: The Beach, NC
Posts: 603
|
My part numbers came from the dealer. Those part number you have are old and have been superseded by the ones I gave you. They are the most updated part numbers. As far as pictures, I have them, but need to reduce the size before I upload to imgur to post.
Sorry for that delay. But believe me, it’s not noticeable. Take the plunge. You’ll be happy you did
__________________
'16 2SS, M6, Borla Atak |
09-20-2019, 05:05 PM | #40 | |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
Quote:
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
|
09-22-2019, 01:32 PM | #41 |
Drives: 2019 ZL1, M6 Join Date: Feb 2018
Location: Detroit, MI
Posts: 49
|
ZL1 Rocker Panels
Can you separate the mosaic black portion of the rocker from the painted quarter panel piece????
I just ran over something in mine and scratched up the underside of my rocker so I need the mosaic portion painted and was hoping to not bother with the body color portion. Thanks
__________________
2019 ZL1 - M6
Mods - tbd |
|
|
Post Reply
|
Thread Tools | |
|
|