Procharged oil leak need help.

Staximus · 05-24-2020, 07:56 PM

As title says. I threw a Procharger and been using a the Procharger canned tune for a month now. Last night when I did a pull a shit ton of white smoke came out the back. Pulled over and open good, oil was everywhere. Turn car back on looking for leak, could not find it. Started driving away and wasn’t losing oil, everything was good. Drove all the way home from Connecticut. Next day went and got oil, filled up. Did a quick 2 second pull, nothing. Car runs and drives fine. Did a prolonged pull of about 5 seconds and got into 4th gear, it started it again, hence the piks right now. Any info guys? Just base Procharger tune and 2 step spark plugs.

Staximus · 05-24-2020, 07:56 PM

Please call/text 9788095636, thank you.

mikem2104 · 05-24-2020, 08:40 PM

I’d bet on the front seal, pretty common when you go FI. Often times though it comes with orther damage potential ... you can start with the seal replacement on the crank and hope or have a reputable shop take look. I’m sure others with a lot of experience on the topic will chime in.

RobbyBeefcake87 · 05-26-2020, 09:18 AM

I've heard the same about the front seal with FI. If I'm not mistaken ls3 front seals fit and are better.

Shocker91 · 05-26-2020, 09:29 AM

thats defintely a front crank seal. the LT1 front seal is super thin and doesnt like boost. the LS3 front crank seal is the better replacement. with that said you may have to go through and also add a vented breather for the crank case or a vented catch can. you generated enough pressure in there to blow the front seal out, the LS3 seal will hold the front down trapping that pressure and may blow something else out or generate more blow by.

KingLT1 · 05-26-2020, 09:38 AM

my replies are here.

https://www.camaro6.com/forums/showthread.php?t=575967

TheRealJA105 · 05-26-2020, 09:44 AM

https://www.camaro6.com/forums/showthread.php?t=550461

Happened to me I now run the Metco breather after a rebuild.

cmeJATT · 05-26-2020, 11:06 AM

What is the average cost to build bottom end? Nothing crazy .. just for a shits n giggles ..

Puddin · 05-26-2020, 11:27 AM

Quote:

Originally Posted by cmeJATT

What is the average cost to build bottom end? Nothing crazy .. just for a shits n giggles ..

Around 5k after labor is included if your staying stock cubes.

05-24-2020, 07:56 PM	#1
Staximus Drives: 2019 Camaro 2SS Join Date: Apr 2020 Location: Tewksbury MA Posts: 39	Procharged oil leak need help. As title says. I threw a Procharger and been using a the Procharger canned tune for a month now. Last night when I did a pull a shit ton of white smoke came out the back. Pulled over and open good, oil was everywhere. Turn car back on looking for leak, could not find it. Started driving away and wasn’t losing oil, everything was good. Drove all the way home from Connecticut. Next day went and got oil, filled up. Did a quick 2 second pull, nothing. Car runs and drives fine. Did a prolonged pull of about 5 seconds and got into 4th gear, it started it again, hence the piks right now. Any info guys? Just base Procharger tune and 2 step spark plugs. Attached Images

05-24-2020, 08:40 PM	#3
mikem2104 Drives: 18 2SS 1LE, 20 Canyon Denali Join Date: Feb 2016 Location: Windsor, ON Posts: 488	I’d bet on the front seal, pretty common when you go FI. Often times though it comes with orther damage potential ... you can start with the seal replacement on the crank and hope or have a reputable shop take look. I’m sure others with a lot of experience on the topic will chime in. __________________ Mike Current Garage: 18' 2SS 1LE, Hyper Blue 23' GMC Canyon Denali Previously: 20' GMC Canyon Denali 16' 2SS 6MT, Hyper Blue, Kalahari, 20" PVW Chrome Split wheels, NPP, MRC (Total Loss) 14' Ford Edge Sport 06' Saab 9-7x,13' Nissan 370z Sport, 12' VW Jetta GLI, 02' Olds Bravada

05-26-2020, 09:18 AM	#4
RobbyBeefcake87 Drives: 2018 Camaro SS 1LE Join Date: Aug 2018 Location: Tampa Florida Posts: 1,980	I've heard the same about the front seal with FI. If I'm not mistaken ls3 front seals fit and are better. __________________ 2000 Miata - aventi storm wheels, roll bar. 2019 Mustang GT pp1 - svt pp2 wheels, mbrp cat back, sync 3 upgrade, p1x procharger + stg2 intercooler. 2018 Colorado zr2 - zr2 sport bar, showcase spare tire. 2018 Camaro SS 1LE - GM cai, black bowties, suede knee bolsters, 1le plate frame, black fuel door, dark tails + 3rd brake light, euro side markers + led's, GM all weather floor mats, velossatech big mouth, GM strut brace. 2017 Corvette Grandsport (sold) - untouched. 2006 GTO (sold) - iat relocation, air box mod, monero side marker lights.

05-26-2020, 09:29 AM	#5
Shocker91 Drives: 2017 2SS, M6, Silver Join Date: Jun 2018 Location: Fort Meade, Maryland Posts: 93	thats defintely a front crank seal. the LT1 front seal is super thin and doesnt like boost. the LS3 front crank seal is the better replacement. with that said you may have to go through and also add a vented breather for the crank case or a vented catch can. you generated enough pressure in there to blow the front seal out, the LS3 seal will hold the front down trapping that pressure and may blow something else out or generate more blow by. __________________ 17 2SS, Pray Performance Forged/Stroked 416, 2.9 Whipple (Pray ported), Stage 2.5 Pray ported heads, RotoFab Big Gulp, Katech 103mm TB, Pray Performance stage 3 forced induction cam, 8.855” crank shaft lower pulley, 3.00 S/C pulley, LT4 Fueling, SMG auxiliary fuel system, 2' TSP LT headers with X-Pipe, Magnaflow Competition axleback, Mighty Mouse Wild catch can, Hurst Short Shifter. Tuned by Pray Performance. 1011WHP/982WTQ

05-26-2020, 09:38 AM	#6
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,798	my replies are here. https://www.camaro6.com/forums/showthread.php?t=575967 __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

05-26-2020, 09:44 AM	#7
TheRealJA105 Drives: 2013 C6Z06 Join Date: Nov 2016 Location: PA Posts: 1,577	https://www.camaro6.com/forums/showthread.php?t=550461 Happened to me I now run the Metco breather after a rebuild.

05-26-2020, 11:06 AM	#8
cmeJATT Drives: SS-6-SPD Join Date: Jan 2017 Location: New Jersey Posts: 1,364	What is the average cost to build bottom end? Nothing crazy .. just for a shits n giggles ..

User Name		Remember Me?
Password