01-13-2018, 09:04 PM | #1 |
Drives: 2017 50th Camaro SS Join Date: Jul 2016
Location: Maryland
Posts: 525
|
Procharger HELP!!
I am posting this in 2 sections, Forced Induction and Tuning because it relates to both and I could use an answer quickly, thanks!!
Installed ProCharger and Kooks LT today and install went incredibly smooth. I'll be doing a write on soon. Question, though, the Procharger locates the MAF sensor in the pipe coming back from the intercooler into the throttle body which means a lot of forced air is coming over the MAF. I would thought it would have been in the filter pipe like is normal. We are getting an MAF code and the tuner is having a hard time tuning. It looks like the MAF is in correct as it will only line up one way and fits the bolt holes properly. Has anyone run into this issue? Is the tuner missing something I can relay to him? Thanks
__________________
50th Anniversary Edition |Borla Atak and 60606 mid pipes| Kooks 1 7/8" | ProCharger Stage II |305/45/17 DRs | Circle D 3500 stall | LT4 fueling | Custom made Lowside Aux Pump | Alky Control Meth | DSX E85
|
01-13-2018, 09:23 PM | #2 |
Drives: 16’ 2SS A8 HBM Procharged Join Date: Jun 2017
Location: Boston
Posts: 410
|
The forced air has to go through the MAF. Otherwise if it were on the other side of the supercharger by he filter it wouldn’t be able to account for the extra air when in boost. The location is normal and that’s where mine is as well. Never got a code with either the handheld tuner it cane with nor the custom tuning done afterward.
I’m sure someone else can chime in with their input. My only suggestion would be to make sure the extension harness for the MAF is connected all the way and none of the pins are bent inside the connector. Good luck.
__________________
16' 2SS A8 Hyperblue | P1SC-1, Race IC | JMS fuel pump voltage booster | Jannetty custom tune | Elite E2-X catch can | M017 Wheels
|
01-14-2018, 09:30 AM | #3 |
Drives: 2018 ZL1 Join Date: Oct 2011
Location: Huntingtown, MD
Posts: 1,138
|
I’d check the MAF extension cable. I had an issue with mine and when I pulled it apart the pins were pushed in.
__________________
2018 ZL1…Many mods to come
|
01-14-2018, 04:54 PM | #4 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
Provided the cable is good my next question would be if the tuner has tuned a boosted vehicle before and knows how to rescale the MAF tables.
What codes are you getting in regards to the MAF. |
01-16-2018, 08:45 AM | #5 |
Drives: 2017 50th Camaro SS Join Date: Jul 2016
Location: Maryland
Posts: 525
|
Thanks all, problem solved.
__________________
50th Anniversary Edition |Borla Atak and 60606 mid pipes| Kooks 1 7/8" | ProCharger Stage II |305/45/17 DRs | Circle D 3500 stall | LT4 fueling | Custom made Lowside Aux Pump | Alky Control Meth | DSX E85
|
01-16-2018, 12:48 PM | #6 |
You can only YOLO once.
Drives: '16 2SS & '15 Subaru Forester Join Date: Jan 2016
Location: Albany, OR
Posts: 1,677
|
...and what was the solution?
__________________
2016 Camaro 2ss
-Summit White / Ceramic White -8A, NPP, MRC, Ceramic White package plus knee pads, black bowties. -1st Car to have the "full" SEMA High Performance Graphics kit from 6LEDesigns. -1st Car to have the 6LEDesigns Blade Spoiler. -Borla S-Type w/ custom H-Pipe -Procharger P-1X Stage 2 |
01-16-2018, 12:49 PM | #7 |
Drives: 2016 1SS D1SC Methfed Lowered Wrapd Join Date: Apr 2016
Location: CA
Posts: 632
|
__________________
//2016 1SS M6 D1SC Upgraded IC 4.25 Pulley//
// Alky Control Meth Kit running 100% methanol // (purchased from JDP, installed by True Bliss Customs, tuned by NewEraPerformance in Augora Hills) // 3M/Gotch Design Sponsored Gloss Deep Space Colorshift Wrap // |
01-16-2018, 02:13 PM | #8 |
Drives: 2017 50th Camaro SS Join Date: Jul 2016
Location: Maryland
Posts: 525
|
MAF extension wire.
__________________
50th Anniversary Edition |Borla Atak and 60606 mid pipes| Kooks 1 7/8" | ProCharger Stage II |305/45/17 DRs | Circle D 3500 stall | LT4 fueling | Custom made Lowside Aux Pump | Alky Control Meth | DSX E85
|
01-16-2018, 04:47 PM | #9 |
Drives: 2018 ZL1 Join Date: Oct 2011
Location: Huntingtown, MD
Posts: 1,138
|
__________________
2018 ZL1…Many mods to come
|
01-17-2018, 03:39 PM | #10 |
Drives: 16' 2SS Join Date: Jul 2016
Location: Frankfort
Posts: 80
|
I had same issue with my ecs vortech kit. I think they get extensions from caspers.
|
01-18-2018, 05:15 PM | #11 |
Drives: Many C7's Join Date: Apr 2014
Location: Kansas City
Posts: 573
|
|
01-31-2020, 06:54 PM | #12 |
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
Anyone have a link to a better MAD extension harness? Procharger one sent doesn’t work and having the same issues as this gentleman here. Thanks
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
01-31-2020, 07:28 PM | #13 |
Drives: 2017 1SS A8 Nightfall Gray Join Date: Feb 2017
Location: Maryland
Posts: 331
|
Maybe this will help.
__________________
|
02-01-2020, 12:12 PM | #14 |
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
Post Reply
|
|
|