Carbon fiber parts..

EDFHOBBIES · 10-25-2019, 09:52 AM

Carbon Parts available and Coming Soon!

Here is a list of what's coming out in Jan 2020

Interior parts going into production:

Stereo Cover
Push Button Cover
Steering wheel 3 piece set, lower part is real replacement part
Gear shift bezel manual 6 real replacement part
door handle cover
door handle windows cover
door pad real replacement part
knee pad on center console real replacement part
upper seat belt panel

Interior parts in the process:

Pillars with and with out gauge pods
Complete front bezel dash piece from cluster across to pass side
Complete upper dash to window
Dash Insert similar to GMs
Complete Center console
door seals replacement part
Just picked up 2 door panels so maybe a whole piece or at least a carbon part for the lighted section
Upper roof controls cover
AC control maybe a cover or replacement part

Engine bay parts made so far:

Coil Covers
Radiator Cover
Radiator Cover extensions / under hood plates
Expansion tank cover
Fuse box cover

Engine nay parts coming:

Washer fluid cover or container
Brake reservoir cover or container

Exterior Parts made so far:

Zl1 1le Splitter
Zl1 1le Bezels
Zl1 1le Dive planes
Zl1, Zl1 1le Rocker panels
Splash or rock guards front and rear

Exterior Parts Coming:

Zl1 Rear Diffuser

Remember these are real Carbon parts not plastic parts hydro dipped!

Please be patient,

I don't really have any idea on prices I'm just lucky to be the test vehicle! Also I go out and buy all the oem parts to be made in carbon for the mold process. I know I post a lot and there's not a lot of info yet but, remember I invested at least 3k in these parts and I've been out of pocket for over a year and now the parts are finally being made for my investment.

EDFHOBBIES · 11-08-2019, 07:31 AM

https://youtu.be/oUS0Ftp_duE

Here is a teaser of what's coming soon!

Smokin19 · 11-08-2019, 09:51 AM

I sent them an email 2 weeks ago and the answer I got back from the sales department is there will be no parts available until after the first quarter end of March.

EDFHOBBIES · 11-08-2019, 10:00 AM

Makes sense it was jan 2020 but I just dropped stuff off. They were planning on the console and dash to be the end. They told me all the efforts were going into R and D(moulds) that takes up a lot time vs producing parts from the moulds all ready completed.

IneedAZ · 11-08-2019, 04:24 PM

There goes this year's car show season, but at least I will be ready for next years

EDFHOBBIES · 11-08-2019, 05:29 PM

Like any of us have a chance against Zeus zl1

2018$S1le · 11-17-2019, 06:43 PM

EDFHobbies, where did you get those carbon fiber splash guards? Or is that one of the things coming next year?

EDFHOBBIES · 11-17-2019, 07:52 PM

Those are ready I just have to get the car over Tuesday or Wednesday for pics so they can list some stuff

2018$S1le · 11-18-2019, 05:25 PM

Sweet thank you! There’s a few things in there I may need to purchase haha!!!

EDFHOBBIES · 12-18-2019, 08:00 AM

testing these tomorrow!

Kelly@PCMofNC · 12-18-2019, 10:01 AM

Wow, those look fantastic.

PS are you "the" edfhobbies? Fellow RC enthusiast here

anukula · 12-18-2019, 10:13 AM

i need that entire center console piece of the arm rest. When will they be in production?

IneedAZ · 12-18-2019, 10:45 AM

I'm ready!!

EDFHOBBIES, do u still have your supercharger resevoir tank? Wasn't it similar to the ADM? If you have it, can they make a cover for that ?

EDFHOBBIES · 12-18-2019, 11:15 AM

Quote:

Originally Posted by Kelly@PCMofNC

Wow, those look fantastic.

PS are you "the" edfhobbies? Fellow RC enthusiast here

Yup I owned a ducted fan RC shop for 10 years then sold it and web page to a guy name Elmer that worked for AA airlines.

I haven't flown for about 3 years the cars take all my time!

10-25-2019, 09:52 AM	#1
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Carbon fiber parts.. Carbon Parts available and Coming Soon! Here is a list of what's coming out in Jan 2020 Interior parts going into production: Stereo Cover Push Button Cover Steering wheel 3 piece set, lower part is real replacement part Gear shift bezel manual 6 real replacement part door handle cover door handle windows cover door pad real replacement part knee pad on center console real replacement part upper seat belt panel Interior parts in the process: Pillars with and with out gauge pods Complete front bezel dash piece from cluster across to pass side Complete upper dash to window Dash Insert similar to GMs Complete Center console door seals replacement part Just picked up 2 door panels so maybe a whole piece or at least a carbon part for the lighted section Upper roof controls cover AC control maybe a cover or replacement part Engine bay parts made so far: Coil Covers Radiator Cover Radiator Cover extensions / under hood plates Expansion tank cover Fuse box cover Engine nay parts coming: Washer fluid cover or container Brake reservoir cover or container Exterior Parts made so far: Zl1 1le Splitter Zl1 1le Bezels Zl1 1le Dive planes Zl1, Zl1 1le Rocker panels Splash or rock guards front and rear Exterior Parts Coming: Zl1 Rear Diffuser Remember these are real Carbon parts not plastic parts hydro dipped! Please be patient, I don't really have any idea on prices I'm just lucky to be the test vehicle! Also I go out and buy all the oem parts to be made in carbon for the mold process. I know I post a lot and there's not a lot of info yet but, remember I invested at least 3k in these parts and I've been out of pocket for over a year and now the parts are finally being made for my investment. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber Last edited by EDFHOBBIES; 11-08-2019 at 08:18 AM.

11-08-2019, 07:31 AM	#2
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Parts coming soon from Trufiber! https://youtu.be/oUS0Ftp_duE Here is a teaser of what's coming soon! Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber Last edited by EDFHOBBIES; 11-08-2019 at 08:21 AM.

11-08-2019, 09:51 AM	#3
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,551	I sent them an email 2 weeks ago and the answer I got back from the sales department is there will be no parts available until after the first quarter end of March. __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

11-08-2019, 10:00 AM	#4
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Makes sense it was jan 2020 but I just dropped stuff off. They were planning on the console and dash to be the end. They told me all the efforts were going into R and D(moulds) that takes up a lot time vs producing parts from the moulds all ready completed. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

11-08-2019, 04:24 PM	#5
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	There goes this year's car show season, but at least I will be ready for next years __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

11-08-2019, 05:29 PM	#6
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Like any of us have a chance against Zeus zl1 __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

11-17-2019, 06:43 PM	#7
2018$S1le Drives: '19 ZL1 1LE Summit White M6, PDR Join Date: May 2019 Location: Anderson, In Posts: 89	EDFHobbies, where did you get those carbon fiber splash guards? Or is that one of the things coming next year?

11-17-2019, 07:52 PM	#8
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Those are ready I just have to get the car over Tuesday or Wednesday for pics so they can list some stuff __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

11-18-2019, 05:25 PM	#9
2018$S1le Drives: '19 ZL1 1LE Summit White M6, PDR Join Date: May 2019 Location: Anderson, In Posts: 89	Sweet thank you! There’s a few things in there I may need to purchase haha!!!

12-18-2019, 08:00 AM	#10
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	testing these tomorrow! Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

12-18-2019, 10:01 AM	#11
Kelly@PCMofNC Drives: 2010 RS/SS Join Date: Dec 2010 Location: Mooresville, NC Posts: 959	Wow, those look fantastic. PS are you "the" edfhobbies? Fellow RC enthusiast here

12-18-2019, 10:13 AM	#12
anukula Drives: Camaro 2ss Join Date: Jun 2018 Location: Austin Posts: 169	i need that entire center console piece of the arm rest. When will they be in production?

12-18-2019, 10:45 AM	#13
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	I'm ready!! EDFHOBBIES, do u still have your supercharger resevoir tank? Wasn't it similar to the ADM? If you have it, can they make a cover for that ? __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

User Name		Remember Me?
Password