BEST BOOST GAUGE

Zings_Maro · 04-19-2018, 03:47 PM

Hey guys!

What is your go too boost gauge? I’m torn between the one from P3 Gauges, which goes into the driver side air vent, or Aeroforce Technology which is less stealthy, but looks cool! Just curious as to which you like more and/or why? Or if you are using a different setup, let me know!

oneredry · 04-19-2018, 03:52 PM

this is open for debate. Personally I have the P3 and does exactly what I need it to do. I don't buy for flashy, but this one just so happened to fit nicly into the vent area. I don't like clutter so others were out for me.

Drsagacity · 04-19-2018, 04:28 PM

There is one other thread that is discussing a change to the stock dash to show the boost gauge like the zl1. If that doesn’t progress soon, I will order the P3.

jeffm4688 · 04-19-2018, 04:47 PM

Quote:

Originally Posted by Zings_Maro

Hey guys!

What is your go too boost gauge? I’m torn between the one from P3 Gauges, which goes into the driver side air vent, or Aeroforce Technology which is less stealthy, but looks cool! Just curious as to which you like more and/or why? Or if you are using a different setup, let me know!

I ended up going with the AEM wideband fail safe gauge which I like very much. I was between the nGauge and the P3 though as well, both very good choices.

misterjaayy · 04-19-2018, 05:53 PM

http://www.camaro6.com/forums/showthread.php?t=473703

A similar topic was brought up. It’s like ten threads down. Just gotta look around and search the forum a little!

Zings_Maro · 04-19-2018, 09:17 PM

Quote:

Originally Posted by misterjaayy

http://www.camaro6.com/forums/showthread.php?t=473703

A similar topic was brought up. It’s like ten threads down. Just gotta look around and search the forum a little!

Oh I searched the forum a lot, actually! Haha too much! Just looking for some fresh thoughts!

Epx998 · 04-19-2018, 09:29 PM

One that works

Zings_Maro · 04-19-2018, 10:22 PM

Quote:

Originally Posted by Epx998

One that works

Duh...

parbreak · 04-20-2018, 03:08 PM

P3 gauge with analog boost sensor.

Lemosine · 04-20-2018, 03:50 PM

Dose a scan gauge read boost? i know it reads vacuum but was curious if your boosted will it read up above negative so you would not need a sensor. I just remember on my old turbo car it would not read Vacuum.

Atomic Ed · 04-20-2018, 04:20 PM

I use Torque app on my Android phone. Having many boost gauges over time, the novelty wears off and you may begin to wish it wasn't staring back at you all the time.

The Torque app lets me monitor what I want, when I want and put it away when I'm done.

Tcamaro · 04-20-2018, 05:23 PM

I'm a fan of anolog gauges. Anybody know of one that fits the depth of the aero force dual pod? 2.5 inches deep isn't much when you factor in the plumbing fittings ect.

chrest · 04-20-2018, 06:42 PM

Quote:

Originally Posted by Tcamaro

I'm a fan of anolog gauges. Anybody know of one that fits the depth of the aero force dual pod? 2.5 inches deep isn't much when you factor in the plumbing fittings ect.

doesnt fit. i have a analog autometer gauge that sticks out about a 1/2 inch.

Epx998 · 04-28-2018, 02:24 PM

Does the AEM wideband fail safe gauge show boost?

04-19-2018, 03:47 PM	#1
Zings_Maro Drives: 2017 Krypton Green 2SS Join Date: Sep 2017 Location: Inland Empire Posts: 47 View My Garage	BEST BOOST GAUGE Hey guys! What is your go too boost gauge? I’m torn between the one from P3 Gauges, which goes into the driver side air vent, or Aeroforce Technology which is less stealthy, but looks cool! Just curious as to which you like more and/or why? Or if you are using a different setup, let me know! __________________ Instagram: @zings_maro

04-19-2018, 03:52 PM	#2
oneredry HYPER SS Drives: 2016 Supercharged 2SS Join Date: Feb 2014 Location: Troy OH Posts: 1,252	this is open for debate. Personally I have the P3 and does exactly what I need it to do. I don't buy for flashy, but this one just so happened to fit nicly into the vent area. I don't like clutter so others were out for me. __________________ Ordered: 1/15/2016 2000 status 02/01/16 3000 status 02/29/16 3400 status 03/07/16 TPW of 03/14/16 4200 status 03/17/16 in transit! Delivered 03/23/16 2SS Hyper Blue \| 6M \| NPP \| Mag ride \| ceramic white Int. \| Black out bow ties \| P3 Gauge\| Front splitter. \| 6 pot upgraded brembo brakes. \| Magnuson Supercharger/95MM pulley \| Rotofab Intake \| ZL1 side skirts \| HRE FF04 wheels - Michelin PSS4 \| ZL1 add ons rock guards and lift points. \| AWE touring - resinated catback with link pipes.

04-19-2018, 04:28 PM	#3
Drsagacity Drives: 2017 Camaro 2SS Nightfall Gray vert Join Date: Jan 2018 Location: Swansea, IL Posts: 1,219	There is one other thread that is discussing a change to the stock dash to show the boost gauge like the zl1. If that doesn’t progress soon, I will order the P3. __________________ 2017 Camaro 2SS vert - Nightfall Gray Magnuson Heartbeat SC - Tuned by JRE Racing 776whp/745wtq (12psi) 2018 Corvette Z06 vert- Black To be tuned by JRE Racing TBD performance

04-20-2018, 03:08 PM	#9
parbreak Drives: 2017 50th Camaro SS Join Date: Jul 2016 Location: Maryland Posts: 525	P3 gauge with analog boost sensor. __________________ 50th Anniversary Edition \|Borla Atak and 60606 mid pipes\| Kooks 1 7/8" \| ProCharger Stage II \|305/45/17 DRs \| Circle D 3500 stall \| LT4 fueling \| Custom made Lowside Aux Pump \| Alky Control Meth \| DSX E85

04-20-2018, 03:50 PM	#10
Lemosine Drives: 2016 M6 Hyper Blue 2SS Join Date: May 2016 Location: Texas Posts: 221	Dose a scan gauge read boost? i know it reads vacuum but was curious if your boosted will it read up above negative so you would not need a sensor. I just remember on my old turbo car it would not read Vacuum. __________________ 16 2SS M6 // Kooks 1- 7/8 w/Off Road Pipes // RotoFab w/Oiled filter // Custom Axle Back Exhaust // E-85 Sensor // Tuned SOLD!!

04-19-2018, 05:53 PM	#5
misterjaayy Drives: 2019 CTS-V Join Date: Feb 2016 Location: San Diego Posts: 421	http://www.camaro6.com/forums/showthread.php?t=473703 A similar topic was brought up. It’s like ten threads down. Just gotta look around and search the forum a little!

04-19-2018, 09:29 PM	#7
Epx998 \|Engineer\| Drives: 2016 Camaro SS Join Date: Aug 2016 Location: San Jose, CA Posts: 402	One that works

04-20-2018, 04:20 PM	#11
Atomic Ed Drives: 2001 Audi TT, 2016 Camaro Join Date: May 2016 Location: Eastern Washington Posts: 833	I use Torque app on my Android phone. Having many boost gauges over time, the novelty wears off and you may begin to wish it wasn't staring back at you all the time. The Torque app lets me monitor what I want, when I want and put it away when I'm done.

04-20-2018, 05:23 PM	#12
Tcamaro Drives: 16' 2SS Join Date: Jul 2016 Location: Frankfort Posts: 80	I'm a fan of anolog gauges. Anybody know of one that fits the depth of the aero force dual pod? 2.5 inches deep isn't much when you factor in the plumbing fittings ect.

04-28-2018, 02:24 PM	#14
Epx998 \|Engineer\| Drives: 2016 Camaro SS Join Date: Aug 2016 Location: San Jose, CA Posts: 402	Does the AEM wideband fail safe gauge show boost?

User Name		Remember Me?
Password