You are browsing camaro6 
12-24-2019, 09:25 PM
|
#1 |
|
Horsepower whisperer
Drives: Camaro Join Date: Jun 2017
Location: MO
Posts: 185
|
Stud install- line hone?
.
Last edited by Goohead; 01-28-2020 at 11:41 PM. |
|
|
|
12-25-2019, 08:09 AM
|
#2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Well, that's really close but since I don't build my own engines so I be the wrong one to ask but it seems feasible. My block was not align honed when we did the ARP studs, I know it was checked but not honed. Where do you live in Missouri? I live north of Columbia.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|
|
|
12-25-2019, 09:06 AM
|
#3 |
      
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
Mine wasn't line honed. My machinist, the most anal guy ever born, was surprised.
He miced the mains ten ways from Sunday. It just didn't need it. My guy said nearly all LS motors need line honing. Not sure if I just got lucky, or if there's something about the LT block that makes it more stable.
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
|
|
|
|
12-25-2019, 02:48 PM
|
#4 |
    Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
These are Y blocks and the studs are centered via the block buttress, most guys put the crank in and if it spings freely you are golden. Texas Speed says you MUST line hone. I did NOT remove my crank during my piston / rod rebuild.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
