05-07-2020, 08:46 PM | #1 |
Drives: 2016 Camaro SS Join Date: Feb 2020
Location: Jackson, MI
Posts: 7
|
DSX Baro / IAT Install
I bought the DSXTuning Baro / IAT and I’m trying to figure out where to install the IAT Sensor. Is there a location for it or do I need to make a hole for it?
|
05-07-2020, 09:16 PM | #2 |
Drives: '16 2SS Join Date: Feb 2017
Location: Saukville, WI
Posts: 197
|
Maybe this can help
|
05-08-2020, 03:18 AM | #3 | |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
Quote:
Kind of depends on what you are trying to measure with the new IAT sensor. I am using one, and since I am using meth injection it is setup behind the throttle body in the intake to read the air temp after the meth is mixed with the air. I just drilled and tapped my plastic intake for the thread on the temp sensor, sealed with 297 Loctite thread sealer and it was done.
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
|
05-08-2020, 05:26 PM | #4 | |
Drives: 2016 Camaro SS Join Date: Feb 2020
Location: Jackson, MI
Posts: 7
|
Quote:
|
|
05-10-2020, 07:56 PM | #5 |
Drives: 2019 Camaro 1LE Join Date: Dec 2019
Location: Washington
Posts: 35
|
M14x1.5
|
07-02-2020, 11:30 PM | #6 |
Drives: 2016 Camaro 2SS Join Date: Feb 2020
Location: Austin, TX
Posts: 70
|
Thread helped. Installed with ease! Appreciated
|
|
|
Post Reply
|
|
|