WILL TRADE PARTS FOR BEER - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JSTEB · 08-08-2019, 04:19 PM

I just took the stock exhaust manifolds and intake/airbox off my 2014 Camaro SS. The manifolds and down pipes do not have the O2 sensors. Just need them out of the garage. The car only has 20k miles so these are slightly used.

I am not asking for money. My residence is in the Cincinnati area. Message me with an offer I cannot refuse. I will then send you the address. You can swing by and check out the build and grab the parts. Please do not ask me to ship. That would defeat the idea of cold beer.

Cheers

J

Rons1le · 08-08-2019, 06:11 PM

Cats are worth $40 each at a scrap place and there are 4 of them there..

Sent from my SM-G960U using Tapatalk

Tritanium · 08-09-2019, 03:03 PM

Quote:

Originally Posted by Rons1le

Cats are worth $40 each at a scrap place and there are 4 of them there..

That's a whole lot of beer😂

Overflow · 08-10-2019, 08:11 AM

Quote:

Originally Posted by Rons1le

Cats are worth $40 each at a scrap place and there are 4 of them there..

Sent from my SM-G960U using Tapatalk

I don’t know about that...

I’ve taken my stock cats to two different places to sell them, and they both denied them and said they weren’t worth anything.

Rons1le · 08-10-2019, 10:03 AM

I scrapped mine back in 2014 and got $160 for both.

Sent from my SM-G960U using Tapatalk

RobZL1 · 08-10-2019, 01:15 PM

I'm not anywhere near Cincinnati, but this is a cool idea. Best of luck with the trade!

Leo72793 · 08-10-2019, 02:13 PM

Quote:

Originally Posted by Rons1le

I scrapped mine back in 2014 and got $160 for both.

Sent from my SM-G960U using Tapatalk

took 2 sets here in FL to a scrapper and got over $400. front ones are worth 2x the rears.

gunchamp · 08-10-2019, 06:06 PM

I need factory manifolds lol. Foolishly tossed mine when i did long tubes. Now doing twin turbos and need a set. Unfortunately im in pa. If you do decide to ship shoot me a pm

Rons1le · 08-10-2019, 06:22 PM

I have a set. I sold a set to a guy in Tennessee and I'm in central Ohio was like $40 shipping. Pm me if interested?

Sent from my SM-G960U using Tapatalk

Overflow · 08-10-2019, 06:54 PM

Quote:

Originally Posted by Rons1le

I scrapped mine back in 2014 and got $160 for both.

Sent from my SM-G960U using Tapatalk

Quote:

Originally Posted by Leo72793

took 2 sets here in FL to a scrapper and got over $400. front ones are worth 2x the rears.

WTF??

Glad I still have them then.

JSTEB · 08-11-2019, 08:07 AM

OK - Ill take to scrapper.

Joecruiser · 08-11-2019, 06:29 PM

Hey guys, pls define scrappers...I'm assuming a used parts - U pic U pull type of place?
Or is it a metal recycling place? I'm going headers soon as wouldve just tossed them.
Thxs

Rons1le · 08-11-2019, 07:55 PM

Metal recycling places

Sent from my SM-G960U using Tapatalk

Joecruiser · 08-11-2019, 09:00 PM

Good to know...Thxs Ron.
Good luck with the beer OP, hopefully someone can use them.
If not, scrappers!

08-08-2019, 04:19 PM	#1
JSTEB Drives: 2014 Camaro SS Join Date: Oct 2018 Location: KY Posts: 4	WILL TRADE PARTS FOR BEER I just took the stock exhaust manifolds and intake/airbox off my 2014 Camaro SS. The manifolds and down pipes do not have the O2 sensors. Just need them out of the garage. The car only has 20k miles so these are slightly used. I am not asking for money. My residence is in the Cincinnati area. Message me with an offer I cannot refuse. I will then send you the address. You can swing by and check out the build and grab the parts. Please do not ask me to ship. That would defeat the idea of cold beer. Cheers J Attached Images

08-08-2019, 06:11 PM	#2
Rons1le Drives: 2015 Camaro 2SS RS 1LE AGM Join Date: Oct 2013 Location: Galion, Oh Posts: 531 View My Garage	Cats are worth $40 each at a scrap place and there are 4 of them there.. Sent from my SM-G960U using Tapatalk __________________ 2015 2SS RS 1LE NPP/w Kooks headers, Procharged, ID1050X injectors, Katech belt tensioner, Mighty Mouse Catch Can, BMR subframe connectors, Matco driveshaft loop, AEM Wideband/Boost/Fuel gauges , Z/28 Splitter and Spoiler/w Wicker bill, Power Stop rotors and brake pads, MRR Z/28 Rep Wheels 20" w/p zeros 285 fronts and 305 rears, ZL1 addons Rock guards and Tow hook, Rear window louvers, Flags on the quarter windows and the moonroof, Billet aluminum door handles.

08-10-2019, 10:03 AM	#5
Rons1le Drives: 2015 Camaro 2SS RS 1LE AGM Join Date: Oct 2013 Location: Galion, Oh Posts: 531 View My Garage	I scrapped mine back in 2014 and got $160 for both. Sent from my SM-G960U using Tapatalk __________________ 2015 2SS RS 1LE NPP/w Kooks headers, Procharged, ID1050X injectors, Katech belt tensioner, Mighty Mouse Catch Can, BMR subframe connectors, Matco driveshaft loop, AEM Wideband/Boost/Fuel gauges , Z/28 Splitter and Spoiler/w Wicker bill, Power Stop rotors and brake pads, MRR Z/28 Rep Wheels 20" w/p zeros 285 fronts and 305 rears, ZL1 addons Rock guards and Tow hook, Rear window louvers, Flags on the quarter windows and the moonroof, Billet aluminum door handles.

08-10-2019, 01:15 PM	#6
RobZL1 fo'shizZL1 Drives: 2017 ZL1 Join Date: Aug 2017 Location: ATL Posts: 1,281	I'm not anywhere near Cincinnati, but this is a cool idea. Best of luck with the trade! __________________ 2017 ZL1 M6 Black \| Maggie 2650 // 103TB // Big Gulp Past Rides- 2014 ZL1 M6 Red Hot \| Tons of mods 2004 CTS-V M6 Silver \| Many mods 1995 Corvette M6 Torch Red \| A few more mods 1992 Camaro M5 White \| A few mods

08-10-2019, 06:22 PM	#9
Rons1le Drives: 2015 Camaro 2SS RS 1LE AGM Join Date: Oct 2013 Location: Galion, Oh Posts: 531 View My Garage	I have a set. I sold a set to a guy in Tennessee and I'm in central Ohio was like $40 shipping. Pm me if interested? Sent from my SM-G960U using Tapatalk __________________ 2015 2SS RS 1LE NPP/w Kooks headers, Procharged, ID1050X injectors, Katech belt tensioner, Mighty Mouse Catch Can, BMR subframe connectors, Matco driveshaft loop, AEM Wideband/Boost/Fuel gauges , Z/28 Splitter and Spoiler/w Wicker bill, Power Stop rotors and brake pads, MRR Z/28 Rep Wheels 20" w/p zeros 285 fronts and 305 rears, ZL1 addons Rock guards and Tow hook, Rear window louvers, Flags on the quarter windows and the moonroof, Billet aluminum door handles.

08-10-2019, 06:06 PM	#8
gunchamp Drives: 15 Camaro SS Join Date: Oct 2018 Location: Mountains of central PA Posts: 1,442	I need factory manifolds lol. Foolishly tossed mine when i did long tubes. Now doing twin turbos and need a set. Unfortunately im in pa. If you do decide to ship shoot me a pm

08-11-2019, 08:07 AM	#11
JSTEB Drives: 2014 Camaro SS Join Date: Oct 2018 Location: KY Posts: 4	OK - Ill take to scrapper.

08-11-2019, 06:29 PM	#12
Joecruiser Drives: 2014 2-SSRS Slushbox Join Date: Sep 2018 Location: Coral Gables, FL Posts: 339	Hey guys, pls define scrappers...I'm assuming a used parts - U pic U pull type of place? Or is it a metal recycling place? I'm going headers soon as wouldve just tossed them. Thxs

08-11-2019, 07:55 PM	#13
Rons1le Drives: 2015 Camaro 2SS RS 1LE AGM Join Date: Oct 2013 Location: Galion, Oh Posts: 531 View My Garage	Metal recycling places Sent from my SM-G960U using Tapatalk __________________ 2015 2SS RS 1LE NPP/w Kooks headers, Procharged, ID1050X injectors, Katech belt tensioner, Mighty Mouse Catch Can, BMR subframe connectors, Matco driveshaft loop, AEM Wideband/Boost/Fuel gauges , Z/28 Splitter and Spoiler/w Wicker bill, Power Stop rotors and brake pads, MRR Z/28 Rep Wheels 20" w/p zeros 285 fronts and 305 rears, ZL1 addons Rock guards and Tow hook, Rear window louvers, Flags on the quarter windows and the moonroof, Billet aluminum door handles.

08-11-2019, 09:00 PM	#14
Joecruiser Drives: 2014 2-SSRS Slushbox Join Date: Sep 2018 Location: Coral Gables, FL Posts: 339	Good to know...Thxs Ron. Good luck with the beer OP, hopefully someone can use them. If not, scrappers!