New wheels today-Rohana RFX-5 - Page 3

Glen e · 07-06-2016, 12:06 PM

I love forgelines, had them on my c7.....but too expensive for my DD camaro. The brushed look in clear powdercoat looks the same and what i was going for.

LesBaer · 07-06-2016, 12:20 PM

Yeah I remember. I didn't know that you sold them though. I went this with one, which takes longer unfortunately.

zepol9 · 12-21-2017, 11:40 PM

Quote:

Originally Posted by Glen e

Rear axle needs to be ground 2 mm, easy mod, for Ctr cap fit....

I just figured this out how did you grind it down

BrianL · 12-27-2017, 09:25 AM

Looks great Glen! I love the spoke design and finish on a red car. I gotta do something myself one day as I am not a fan of the factory black wheels.

LibertyHill · 12-27-2017, 03:35 PM

Quote:

Originally Posted by zepol9

I just figured this out how did you grind it down

I used a 2" 36 grit Roloc disc on a 90 degree die grinder. Seemed more like 6mm needed to come off for me.

zepol9 · 01-02-2018, 02:23 PM

Quote:

Originally Posted by LibertyHill

I used a 2" 36 grit Roloc disc on a 90 degree die grinder. Seemed more like 6mm needed to come off for me.

i had to take the whole nipple off all the way to the threads

LibertyHill · 01-02-2018, 06:21 PM

Quote:

Originally Posted by zepol9

i had to take the whole nipple off all the way to the threads

Yup I guessed that was about 6mm 1/4 inch?

zepol9 · 01-12-2018, 05:32 PM

Quote:

Originally Posted by LibertyHill

Yup I guessed that was about 6mm 1/4 inch?

yea about a 1/4 inch

07-06-2016, 12:06 PM	#29
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	I love forgelines, had them on my c7.....but too expensive for my DD camaro. The brushed look in clear powdercoat looks the same and what i was going for. __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

07-06-2016, 12:20 PM	#30
LesBaer FMPG Drives: 2016 2SS Join Date: Dec 2015 Location: CT Posts: 1,888	Yeah I remember. I didn't know that you sold them though. I went this with one, which takes longer unfortunately. __________________ Ordered 3/8/16- NFG/Ceramic White, M6, MRC, NPP, 6 pots, blk blade, no sunroof, blk splitter, blk bow ties, dark tails, nav. ARH 1 7/8" ceramic coated full sys w/NPP; Maggie 9.2psi (85mm); Jannetty rough idle cam(TSP), tune and LT4 fuel system; Forgeline VX1 Black PVD (20x10,11); R88R 315's; ALPriority; BMR rear arms, bushings, DS loop; RF intake (red); nGauge 93 octane: 712rwhp, 654rwtq / E85 (E66 mix): 734rwhp, 674rwtq (SuperFlow Dyno)

12-27-2017, 09:25 AM	#32
BrianL Drives: 2016 2SS, Red Hot, NPP, Nav, M6 Join Date: Jul 2016 Location: Eagle Creek OR Posts: 783	Looks great Glen! I love the spoke design and finish on a red car. I gotta do something myself one day as I am not a fan of the factory black wheels.

User Name		Remember Me?
Password