You are browsing camaro6 
07-11-2022, 03:27 PM
|
#1 |
  
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Magnuson TVS 2300 blower for sale
Looking to sell my Magnuson TVS 2300 blower for LT4.
Blower is still mounted on car, has ~13k miles on it. Has new heat exchanger bricks, gaskets, and hardware (screws) as of last year. I had to take off blower to fix bad injector and would up doing a full refresh of these items while blower was off. I have the original boxes and likely some extra parts left over from install. Top lid is scratch free, overall unit is in excellent condition. Could optionally include stock TB, 103mm snout, and upgraded smaller 3" pulley. I need to get the boxes out of storage and take photos. I don't remember if I have the stock TB snout. Looking for local pickup in NNJ but could consider shipping. Let me know if you are interested and I can continue to get photos and work out reasonable price. Price: TBD need to get boxes/photos (will happen this week)
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
|
|
07-11-2022, 08:53 PM
|
#2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
You stepping up to the 2650? So your just selling the head unit.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|
|
|
07-12-2022, 05:37 AM
|
#3 |
|
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Yes stepping up to 2650.
Selling head unit, intercooler hose fittings, crossover intercooler hose, stock pulley, aftermarket 3" pulley are definite. I have to go pull the box out of storage that it came with to see what else. There may be additional hose and the black tank that came with it, TBD. I would pass along the IAT2 temp sensor harness from the new 2650 to the purchaser of the 2300. I have to see if I have the stock snout or not, right now it has a 103mm on it. I don't know if that 103mm can be reused or not on 2650, if not then it comes too. If it can and I have the stock snout it would also come with stock TB. TBD till later in the week. I appreciate anyone's interest.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
Last edited by LiqTenExp; 07-14-2022 at 06:22 PM. |
|
|
|
|
07-14-2022, 06:19 PM
|
#4 |
|
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Could add on the Katech 103mm TB also as an option.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
Last edited by LiqTenExp; 07-14-2022 at 09:11 PM. |
|
|
|
|
07-14-2022, 09:08 PM
|
#5 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I used mine off my 2300 on my SS when I went to the 2650. Not sure if they changed something or not. Maybe the LT4 is different.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
07-14-2022, 09:10 PM
|
#6 | |
|
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Quote:
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
|
|
|
|
07-15-2022, 07:40 AM
|
#7 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I don't think there is a difference. I think the angle is the same so it would sure save you a few hundred dollars.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
07-15-2022, 06:33 PM
|
#8 |
        
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,751
|
My brother ran the 2650 112mm snout on his 2300 (before he upgraded to the 2650 blower) so I think the snout is interchangeable?
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
|
|
|
07-15-2022, 10:20 PM
|
#9 | |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Quote:
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
