06-21-2019, 11:13 PM | #1 |
Drives: 2017 Camaro 2SS Vert Join Date: Apr 2019
Location: Texas
Posts: 161
|
V6 LT stock brakes to ss rotors
Are the stock rotors for the V6 LT the same size as the SS? I purchased some SS calipers and can’t find a rotor size for them.
|
06-22-2019, 12:29 AM | #2 |
Drives: 2020 1SS 1LE M6 was 2018 V6 RS A8 Join Date: May 2018
Location: Minnesota
Posts: 59
|
2017 V6 LT front caliper is 12.6 in. (13592623). 2017 SS front caliper is 13.6 in. (22991317). Rears cannot be swapped because of differences in the parking brake on LT and SS.
|
06-23-2019, 12:08 AM | #3 |
Drives: 2017 Camaro 2SS Vert Join Date: Apr 2019
Location: Texas
Posts: 161
|
Thanks I’ll pick up some rotors then. Now I have to decide if I wanna get drilled and slotted or just slotted.
|
06-23-2019, 03:39 AM | #4 |
Drives: 2020 1SS 1LE M6 was 2018 V6 RS A8 Join Date: May 2018
Location: Minnesota
Posts: 59
|
The rotors that come from the factory on the SS, SS 1LE, ZL1, and ZL1 1LE are completely smooth - no slots and no drilled holes. The Chevrolet Performance upgrade kit 4- and 6-piston Brembos are slots only. Cross-drilled rotors can develop cracks under severe use around the holes because of larger heat differences just around the hole and the surrounding material. See here: https://www.camaro6.com/forums/showthread.php?t=452333
I personally would get the slotted-only rotors but only because I like the look and my car is street-only. |
|
|
Post Reply
|
|
|