07-15-2012, 11:03 AM | #1 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
tensioner pulley broke
did a hard clutch dump on the way to races this morning and tensioner pulley braket actually cracked and broke off,wonder if there are aftermarket stronger ones out there.anyone else this happen to
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
07-15-2012, 11:51 AM | #2 |
Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: HOMELESS
Posts: 10,010
|
That's crazy....
|
07-15-2012, 11:56 AM | #3 |
Drives: 2010 Camaro 1ss IOM Join Date: May 2009
Location: Williamsport,PA
Posts: 2,246
|
www.Jannettyracing.com
The Super Tensioner is awesome!
__________________
Jannetty Racing Built and Tuned
416 Maggie Max Package even better now! |
07-15-2012, 11:59 AM | #4 | |
Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009
Location: Bowling Green, Ky
Posts: 3,355
|
Quote:
__________________
|
|
07-15-2012, 12:26 PM | #5 |
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
You can also go with our billet pulley with any of the tensioners.
|
07-15-2012, 01:39 PM | #6 |
Drives: 2010 CAMARO SS Join Date: Apr 2010
Location: ohio
Posts: 1,360
|
OP has a edelbrock e-force...dont think the super tensioner will work with it
|
07-15-2012, 04:47 PM | #7 |
NJ/SoCal HT5 COTW 3/25/12
Drives: 2015 Z06/14 C7/08 Z06/07 Tahoe Z71 Join Date: Nov 2011
Location: South Jersey & SoCal
Posts: 1,961
|
Stock tensioner blows!
I run & suggest the Jannetty piece, comes with built in pulley as well. |
07-15-2012, 05:37 PM | #8 |
Account Suspended
Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009
Location: nc
Posts: 1,835
|
Send me some pic,the ecs,jannety I don't believe will work,u shouldnt have a problem,send me some pixs and give me a call
|
07-15-2012, 07:17 PM | #9 |
Drives: 2010 AquaBlue 2SS/RS Join Date: Sep 2009
Location: Long Island
Posts: 342
|
The tensioner for E Force comes with the kit. Different than stock.
|
07-15-2012, 07:29 PM | #10 |
Account Suspended
|
Call Edelbrock Im sure they will stand by it.
|
07-15-2012, 07:45 PM | #11 |
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
I imagine they will replace it and it may just have been a defective unit....or post pictures with measurements and we will design a stronger billet unit if the demand is there.
|
07-15-2012, 10:33 PM | #12 |
Account Suspended
|
send the broken stuff to sc......stronger is better....Im in!
|
07-15-2012, 11:08 PM | #13 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
ok thanx guy was away from puter all day,yes kind of shi--y at least it didnt break to far from my home,will put picts up as soon as possible
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
07-15-2012, 11:44 PM | #14 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
|
|
|
|