2015 Commemorative Edition

[Javier_Montanez]

Plano Tx

Sent from my SM-G930T using Tapatalk

[Javier_Montanez]

If I make it to Houston I'll look the Club up.

Sent from my SM-G930T using Tapatalk

[Snoman]

We have members from all over Texas.

[CamaroFred]

Originally Posted by LastGen5

Nice - now I need to track down 'cyber grey'. Thank you Blue Angel!

CGM was discontinued in 2011 on Camaros. It was replaced with Ashen Gray Metallic (AGM).

Your paint code could be on the door sticker or at the bottom of the RPO label in trunk (floor, on left).

[LastGen5]

Originally Posted by CamaroFred

CGM was discontinued in 2011 on Camaros. It was replaced with Ashen Gray Metallic (AGM).

Your paint code could be on the door sticker or at the bottom of the RPO label in trunk (floor, on left).

Thanks CamaroFred. As it turns out, Cyber Grey Metallic is the color of the stripe. I think the Oracle paint match is perfect.


Sent from my iPhone using Tapatalk

[Javier_Montanez]

Thanks Snoman

Sent from my SM-G930T using Tapatalk

[LastGen5]

A couple of catch up items since the last update: The Mickey Thompson Street Comp Tires were terrible / swapped for Nitto 555r's on 18" wheels. The comparative grip is phenomenal, however, that spelled the quick demise of my stock clutch. So the clutch is replaced with something more substantial (McLeod RXT 1200) along with dual TI267 fuel pumps. In addition, a new Anderson Composites carbon fiber front splitter and rear spoiler courtesy of Phastek. Car is now making 659 whp / 587 ft-lb torque and is now power limited by the stock cam. That's good for now - between tires that hook, a strong clutch and consistent fuel pressure and power across the revs the car is fun!

(Note to anyone messing with their front splitter: If you remove the supporting plastic tabs that hold the top of the splitter (they are riveted in), you MUST replace them with rivets - little flat head bolts will not cut it and you will not be able to get that splitter back on. Ask me about the four hours wasted messing around with that!)

[Adriangarza40]

Anybody have a part # for the commemorative chin splitter?

[LastGen5]

Originally Posted by Adriangarza40

Anybody have a part # for the commemorative chin splitter?

Edited: (I see you probably meant 'chin sticker as opposed to chin splitter'). The front stripe will only be released by GM to a dealer with the associated VIN# and photos (at least this is what I was told) - I had to have mine replaced after one side was damaged. I don't know if you can find it anywhere else.

Reference for the Front Splitter:
This investigation was actually a PITA! The part number directly on the splitter itself: 22986865 however any dealership you reference will not be able to pull up that part number. Instead you can find it with part number: 22997432. This should include the kit with the plastic retainers that affix the splitter to the bottom facia. The local dealership did not have an option to order the mounting kit separately though I found a parts site that indicated they could sell it for ~$130'ish. You can find this part on ebay or other GM 'parts direct' sites for ~$495'ish. (you will still need to get the splitter painted to match).

[PDXSSCE]

I'm making sure you're aware & invited.

https://www.facebook.com/groups/1654333058144733/

[LastGen5]

Originally Posted by PDXSSCE

I'm making sure you're aware & invited.

https://www.facebook.com/groups/1654333058144733/

Thanks - I'm a regular there (you will see I posted there earlier today)!

[Adriangarza40]

Thanks!

[GodWentPunk]

Here is mine....

[LastGen5]

Looks naked without the stripe - second one I've seen today without the stripe: https://www.facebook.com/photo.php?f...type=3&theater. Black & White looks good!