03-12-2018, 09:11 PM | #197 | |
Drives: Nothing cool atm Join Date: Aug 2017
Location: California
Posts: 138
|
Quote:
The fact that the pipes fit consistently for everyone, the important part. And don't require cutting and re welding, and aren't horrible to fit, is what makes this a killer deal. You have to buy a new screw? And a few clamps? Yeah if that's a deal breaker, don't DIY anything. Talk about being useless lmao. "Poor customer service" Gives great working product at a killer price. Isn't ripping anyone off. Product works. Sounds like good customer service to me. |
|
03-12-2018, 10:21 PM | #198 |
Drives: 2016 camaro 2ss Join Date: Apr 2017
Location: FL
Posts: 19
|
just installed these with the stock app, sounds great and was definitely not too hard, took us 5 hours with a bunch of goofing off. just have one issue when my steering wheel in a straight up position, and i try to wiggle it its almost like theres something holding against it but i checked and its not touching the headers. what did i miss up?
|
03-12-2018, 10:42 PM | #199 |
Drives: 2017 Summit White Camaro SS 1LE Join Date: Apr 2015
Location: Miami FL
Posts: 388
|
304 Stainless 1-7/8” Headers and X-Pipe....$489!?!?!
I just finished removing driver side luckily it came off real easy without removing lower brace... this is the area I have pinpointed to rub on the steering shaft. This is the second primary from the front on drivers side 10 inches down from the flange 10-11inches is the affected area. Requires a little... https://youtu.be/O3gy_b2Ioo0 Sent from my iPhone using Tapatalk
__________________
Rotofab Intake, Borla 60606 Midpipes, Corsa Extreme Axleback |
03-13-2018, 12:14 AM | #200 |
Drives: SRT4, 2ss Join Date: Nov 2016
Location: Oviedo FL
Posts: 40
|
Lmao. Good stuff man. Thx for the feedback. I really appreciate it.
|
03-13-2018, 09:41 AM | #201 |
Drives: 2017 Camaro SS 1LE Join Date: Nov 2015
Location: Atlanta, GA
Posts: 148
|
Anyone have any dyno results from these yet?
__________________
Show: C7 Carbon ZL1 Front Splitter/C7 Carbon ZL1 Side Skirts/Diode Dynamics LED Sidemarkers/Tinted Headlights, Fog Lights, and Rear Reflectors/20" Forgestar F14's in Bronze Burst
Go: 17" Forgestar F14s in Bronze Burst with Hoosier Drag Radials/Rotofab Intake w/ Dry Filter/EFI Flex Fuel Kit/Kooks 2" Longtubes with Offroad Connections/PRAY Performance Ported Intake Manifold/PRAY Performance Ported Throttle Body/PRAY Performance Ported Heads/PRAY Performance Tune Suspension: Phastek Lowering Springs/BMR Toe Rods/BMR Control Arms/BMR Trailing Arms/BMR Strut Tower Brace |
03-13-2018, 08:06 PM | #202 |
Drives: 2016 camaro 2ss Join Date: Apr 2017
Location: FL
Posts: 19
|
with just these on my car made 415 rwhp and 410 Tq with e85 it went to 440 and 440, tuned by jeremy bowers.
|
03-13-2018, 09:12 PM | #203 |
Drives: SRT4, 2ss Join Date: Nov 2016
Location: Oviedo FL
Posts: 40
|
|
03-14-2018, 10:51 AM | #204 |
Drives: 2016 camaro 2ss Join Date: Apr 2017
Location: FL
Posts: 19
|
6 speed, pulls were in 4th and on a dyne jet, however people normally go up anywhere from 10-30 rwhp anywhere else.
|
03-14-2018, 11:54 AM | #205 |
Drives: SRT4, 2ss Join Date: Nov 2016
Location: Oviedo FL
Posts: 40
|
Nice. Thanks for the info
|
03-19-2018, 08:45 PM | #206 |
Drives: 2017 Summit White Camaro SS 1LE Join Date: Apr 2015
Location: Miami FL
Posts: 388
|
Sold the headers and mid pipes to another member with a detailed description of the issues.
Overall you get what you pay for fitment issues with the steering shaft and the 3inch mid pipes (they hit the undercarriage in some points). If your willing to mod these headers to fit your good to go but I think since they need to be modified they should be sold at a reduced rate until the proper corrections are made on the next batch. Price can’t be beat but are the headaches really worth it? Not in my opinion
__________________
Rotofab Intake, Borla 60606 Midpipes, Corsa Extreme Axleback |
03-20-2018, 07:25 AM | #207 |
Drives: '17 1ss Join Date: Jun 2017
Location: Borger
Posts: 93
|
|
03-20-2018, 09:43 PM | #208 | |
Drives: 2016 Camaro 1SS Join Date: Feb 2018
Location: S.Florida
Posts: 75
|
Quote:
Ray |
|
03-20-2018, 10:19 PM | #209 | |
Drives: 2017 Summit White Camaro SS 1LE Join Date: Apr 2015
Location: Miami FL
Posts: 388
|
Quote:
Love it how new accounts become white knights lol
__________________
Rotofab Intake, Borla 60606 Midpipes, Corsa Extreme Axleback |
|
03-20-2018, 11:40 PM | #210 | |
Drives: Nothing cool atm Join Date: Aug 2017
Location: California
Posts: 138
|
Quote:
Also how is he a white knight? Pretty immature comment. |
|
|
|
Post Reply
|
|
|