[ZED SLED]

Originally Posted by Mr. Meh

It's for the v3 Trunk Monkey. Same a** kicking ability in a more compact size.

Well, at least I got a response this time

[somedude]

Originally Posted by Emoto

Huh. Anyone got a picture of the funnel?

fourth post down is a picture of the funnel I took.

http://www.camaro6.com/forums/showth...30#post9896630

[Rob99]

Originally Posted by Mr. Meh

Yes, but for SS (non 1LE) there's no tire inflator pouch or sealant as they have RF tire.

Non-MRC/base audio 1SS cars would be missing stuff left and middle.

ZL1 has left, right and center will all hardware with MRC, Amp, Sealant/Inflator, etc due to having non RF tire.

1LE will look similar to ZL1, but I think since it has a different AMP than the 2SS/ZL1, it's in a diff location. But, it'll have the inflator kit with sealant as it's also non RF tire and the MRC controller.

Thanks

[Rob99]

Originally Posted by ZED SLED

The cutout above the compressor/sealer kit I believe is for the optional battery charger. Asked about this in another thread but got no response. Can anyone confirm this?

That slot is empty on mine thought the funnel might go there it has a Velcro strap you can see in my pic post #1.
As for that yellow funnel i saw it at Advance auto earlier for $1.99 it has a very small opening where you would pour from a gas can I can see it spilling or backing up over the opening, I'm going to get this one it's GM#
13580741 it has a wider opening.

[ZED SLED]

Originally Posted by Rob99

That slot is empty on mine thought the funnel might go there it has a Velcro strap you can see in my pic post #1.

Mine is the same way. I asked in a factory charger thread, but apparently it's a secret.

[ZED SLED]

Originally Posted by ZED SLED

Mine is the same way. I asked in a factory charger thread, but apparently it's a secret.

Question answered. Optional factory charger not shipped in that spot. Mystery continues.

[Mr. Meh]

Originally Posted by Rob99

That slot is empty on mine thought the funnel might go there it has a Velcro strap you can see in my pic post #1.

Originally Posted by ZED SLED

Mine is the same way. I asked in a factory charger thread, but apparently it's a secret.

Trunk Monkey seat belt..

[Mr. Meh]

Originally Posted by ZED SLED

Well, at least I got a response this time

You're welcome.. I didn't get the battery charger either but it does appear like it would fit there.

[Emoto]

Originally Posted by somedude

fourth post down is a picture of the funnel I took.

http://www.camaro6.com/forums/showth...30#post9896630

Thanks!