ZL1 Reps - Fitment Concern - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RED_SS · 01-25-2014, 07:03 PM

Just got the rear set from Phastek and have some concerns regarding fitment.
I got the 20x11 43mm, which I believe is the ZL1 factory size.
Are they supposed to fit this tight? Im sure others have these wheels and can chime in. I will be running 295/35 R20 Michelin Pilot SS, if that helps.

I am excited to get the rubber on asap.

Schluney · 01-25-2014, 11:56 PM

That does look close but 20x11 43mm is factory on a ZL1 and 1LE the ZL1 has a 305 the 1LE has a 285

BottleFEED · 01-26-2014, 12:21 AM

Are you lowered any ?

RED_SS · 01-26-2014, 01:14 AM

Quote:

Originally Posted by BottleFEED

Are you lowered any ?

factory suspension. my worry is inner fender clearance.

Ucantctchme · 01-26-2014, 05:44 AM

It will be fine. I just installed these on a customer's car with 315s. I know the Michelin 295s are WIDE but that 43 offset should get it done.

Nine Ball · 01-29-2014, 06:49 PM

You'll be fine with that offset. Wheels tuck in more on the Camaro, as the suspension goes upward. Looks funny when the suspension is hanging like that.

oldfriend · 01-29-2014, 08:55 PM

Quote:

Originally Posted by Nine Ball

You'll be fine with that offset. Wheels tuck in more on the Camaro, as the suspension goes upward. Looks funny when the suspension is hanging like that.

With all the respect , the suspension does not go upwards , the car goes downwards !

BottleFEED · 01-29-2014, 09:18 PM

The suspension looks jacked up at the moment I think that's what he is referring to. When the car is down on the rim an tire

01-25-2014, 07:03 PM	#1
RED_SS Drives: 2013 Camaro SS Join Date: Dec 2013 Location: Dallas Posts: 281	ZL1 Reps - Fitment Concern Just got the rear set from Phastek and have some concerns regarding fitment. I got the 20x11 43mm, which I believe is the ZL1 factory size. Are they supposed to fit this tight? Im sure others have these wheels and can chime in. I will be running 295/35 R20 Michelin Pilot SS, if that helps. I am excited to get the rubber on asap. __________________ 2013 SS - LS3 \| ADM Intake \| Stainless Power LTs \| 227/239 : 114 \| Ported TB \| Spintech Super Pro \| 160* Stat \| Hurst Short Throw \| 1LE Sways \| Factory ZL1 Reps \| Quality Motorsports Tune

01-25-2014, 11:56 PM	#2
Schluney Drives: 2014 2SS 1LE Join Date: Sep 2013 Location: Twin Cities Posts: 621	That does look close but 20x11 43mm is factory on a ZL1 and 1LE the ZL1 has a 305 the 1LE has a 285 __________________ 14 2SS RS 1LE Recaro NPP Pat G cam and tune, Trick flow heads Long tube headers catless

01-26-2014, 12:21 AM	#3
BottleFEED Drives: 2010 2SS/RS M6 Join Date: Dec 2013 Location: Home state: Minnesota STATIONED - Hawaii Posts: 308	Are you lowered any ? __________________

01-26-2014, 05:44 AM	#5
Ucantctchme Drives: 2010 ss. 1990 RS the faster one. Join Date: Jan 2011 Location: Orlando Posts: 549	It will be fine. I just installed these on a customer's car with 315s. I know the Michelin 295s are WIDE but that 43 offset should get it done. __________________ Vararam, XS Power longtubes and exhaust with Magnaflow mufflers, 1LE gears, Vengeance Racing spec'd comp cam with all supporting valvetrain upgrades, Melling Pump. QTP cutouts. 480rwhp.

01-29-2014, 06:49 PM	#6
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	You'll be fine with that offset. Wheels tuck in more on the Camaro, as the suspension goes upward. Looks funny when the suspension is hanging like that. __________________ Fquick.com/NineBall

01-29-2014, 09:18 PM	#8
BottleFEED Drives: 2010 2SS/RS M6 Join Date: Dec 2013 Location: Home state: Minnesota STATIONED - Hawaii Posts: 308	The suspension looks jacked up at the moment I think that's what he is referring to. When the car is down on the rim an tire __________________