04-03-2023, 07:38 PM | #1 |
Drives: 19’ ZL1 A10 / 16’ C7Z M7 Join Date: Apr 2021
Location: Fort Wayne, IN
Posts: 247
|
Factory Blower Build
My 19’ ZL1 A10 went under the knife today. Since I already have a 2650 on my C7Z I wanted to see how my ZL1 would run with the factory little guy. Build is as follows:
-Kong Regular Port w/2.30 upper -LMP Blower Lid -FRE Stage 2 Heads Rebuilt by LME -.028 Head Gaskets “10.6:1” Compression -BTR Stage 1 Cam +38% Fuel Lobe -DSX Flex Fuel Kit -XDI +65 Injectors -LPE Big Bore HPFP -JMS Voltage Booster -DSX Aux Low Side -C.H.E Trunnion Kit -ATI Balancer w/9.25 lower -Katech 103mm TB -Roto Fab Big Gulp -LMP Heat Exchanger -Katech 174 T-Stat -TSP 2” Headers Guesses on power? I’m going to say 840whp on the MD-500 Mustang it will be dyno’d with. Results 863/838 https://youtu.be/5dIzGAS7z6U Last edited by CamOnlyJabroni; 04-27-2023 at 04:56 PM. |
04-03-2023, 08:08 PM | #2 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
Love this build. I’ll be following, as I may eventually add cam and dsx low side to my Kong Stage X. Subscribed.
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
04-03-2023, 08:18 PM | #3 |
Drives: 19’ ZL1 A10 / 16’ C7Z M7 Join Date: Apr 2021
Location: Fort Wayne, IN
Posts: 247
|
|
04-03-2023, 09:35 PM | #4 |
Red Bull
Drives: 2017 Chevy ZL1 Join Date: Dec 2020
Location: Evansville, IN
Posts: 184
|
So you are running the jms voltage booster and the DSX aux kit? I was wondering if that was possible. Great info can’t wait to see your numbers.
|
04-04-2023, 08:00 AM | #5 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,800
|
|
04-04-2023, 08:37 AM | #6 |
Drives: 19’ ZL1 A10 / 16’ C7Z M7 Join Date: Apr 2021
Location: Fort Wayne, IN
Posts: 247
|
yes. I do the same thing on my C7Z and KingLT1 had it making over 1kwhp on E60. Low side was falling to right at 72-73 at redline. Commanding 82 with the mechanical regulator. C7 has a Cordes Aux low side.
|
04-04-2023, 08:38 AM | #7 | |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,565
|
Sweet build.
Quote:
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
04-04-2023, 09:28 AM | #8 | |
Drives: 2022 Camaro 2SS A10 Join Date: Jul 2022
Location: FL
Posts: 524
|
Quote:
Any advantage to running both?
__________________
2022 Camaro 2SS/ Whipple 3.0 / 2"Headers/ PRC LTX Heads/ Forged Internals/LT4 fueling/ DSX Aux/
DSX Flex Fuel/ Meth Injection/ Katech 112 TB/ RotoFab Big Gulp/ Corsa NPP/ Various exterior mods |
|
04-04-2023, 09:36 AM | #9 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,800
|
It provides more fuel to the high side vs running stock in tank and auxiliary. When running E it never hurts to have more fuel delivery headroom.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
04-04-2023, 07:20 PM | #10 |
Drives: 19’ ZL1 A10 / 16’ C7Z M7 Join Date: Apr 2021
Location: Fort Wayne, IN
Posts: 247
|
|
04-04-2023, 09:47 PM | #11 | |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 805
|
Quote:
|
|
04-05-2023, 07:27 AM | #12 |
Petro-sexual
|
850 uncorrected
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
04-05-2023, 03:54 PM | #13 |
Drives: 19’ ZL1 A10 / 16’ C7Z M7 Join Date: Apr 2021
Location: Fort Wayne, IN
Posts: 247
|
Cam is in, heads are on. Plenty of PTV clearance. Was at .035 with no gasket. With the .028 puts me at .063.
Last edited by CamOnlyJabroni; 04-05-2023 at 04:20 PM. |
04-05-2023, 03:57 PM | #14 |
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 4,978
|
|
|
|
Post Reply
|
|
|