06-11-2019, 10:38 PM | #1 |
Drives: 2017 Camaro ZL1 Join Date: Aug 2018
Location: Bel Air, MD
Posts: 319
|
WTB: Borla 60626 3" Cat Delete
Just in case anyone just so happens to be selling their 3" secondary cat delete sections from Borla before I cut and weld a straight section.
Thanks!
__________________
'17 Camaro ZL1 M6
|
06-14-2019, 08:50 AM | #2 |
Drives: 2017 Camaro ZL1 Join Date: Aug 2018
Location: Bel Air, MD
Posts: 319
|
To the top! A scammer attempted to reach out via PM so be careful with the screen name "Jws".
__________________
'17 Camaro ZL1 M6
|
06-17-2019, 09:24 AM | #3 |
Drives: Camaro 2017 2SS Join Date: Apr 2019
Location: Fort Worth
Posts: 17
|
@staples87 yeah i was also talking to JWS and he had a exhaust up for sale. When I told him to send me more pictures he sent me a different exhaust with different colored tips. I asked him why there were different he told me he had a “shop” paint them...y’all be careful
|
06-17-2019, 10:01 AM | #4 | |
Drives: 2017 Camaro ZL1 Join Date: Aug 2018
Location: Bel Air, MD
Posts: 319
|
Quote:
__________________
'17 Camaro ZL1 M6
|
|
06-17-2019, 10:08 AM | #5 | |
Drives: 2018 ZL1 1LE - HBM, PDR Join Date: Jun 2017
Location: Rescue, CA
Posts: 324
|
WTB: Borla 60626 3" Cat Delete
Quote:
I just took off my Borla secondary cat delete pipes #60626. About 2,000 miles on them. Actually I’m going back the other direction and need to source used factory stock cats. Both primary and secondary. Perhaps a trade/barter? PM me.
__________________
JRE Tuned (HPTuners) | 15% OD (9.17" crank pulley) | TVS2300 Maggie Heartbeat Supercharger - 14 psi | E-50 (DSX Flex Fuel kit) | JMS FuelMax Fuel Pump Booster | LPE Big Bore High Volume DI fuel pump | LPE High Flow DI fuel injectors | LT5 95mm TB | RotoFab CAI | AEM X-Series OBD2 wide band gauge | Elite Engineering E2-X catch can | Borla S-type NPP Cat-Back 3" exhaust | Forgeline GTD1 5-lug Satin Graphite | SunTek wrap | C-Quartz Finest Reserve ceramic coated
Last edited by TMS; 06-17-2019 at 10:10 AM. Reason: Added pic |
|
06-20-2019, 10:45 AM | #6 |
Drives: 2017 Camaro ZL1 Join Date: Aug 2018
Location: Bel Air, MD
Posts: 319
|
To the top!... Thanks
__________________
'17 Camaro ZL1 M6
|
06-26-2019, 07:59 AM | #7 |
Drives: 2017 Camaro ZL1 Join Date: Aug 2018
Location: Bel Air, MD
Posts: 319
|
Bump
__________________
'17 Camaro ZL1 M6
|
06-27-2019, 08:38 AM | #8 |
Drives: ISO ss 1le Join Date: May 2018
Location: FL
Posts: 764
|
Just fyi after my research on these i don’t think they work with factory exhaust due to the placement of those flex pipes. Please correct me if I’m wrong though.
|
06-27-2019, 10:06 AM | #9 |
Drives: 2017 Camaro ZL1 Join Date: Aug 2018
Location: Bel Air, MD
Posts: 319
|
Correct, you wouldn't use these as they're 3 inches as well. This is for someone who already has the Borla S-Type or ATAK 3" exhaust on their ZL1 basically.
__________________
'17 Camaro ZL1 M6
|
06-27-2019, 11:28 AM | #10 | |
Drives: ISO ss 1le Join Date: May 2018
Location: FL
Posts: 764
|
Quote:
https://www.ebay.com/itm/2016-2017-2...4AAOSw1lBbZHpZ |
|
|
|
Post Reply
|
|
|