03-14-2024, 12:31 PM | #1 |
Drives: 2011 Chevy Camaro 2SS/RS LS3 M6 Join Date: Mar 2019
Location: Ohio
Posts: 49
|
Speedmaster PCE Diff Cover Question
So I was going to install a new diff cover on my Camaro with JRE main caps to kinda help futureproof things and was looking for someone with some experience with this thing. In the attached pictures there's a square held in place with an allen key screw where the vent attaches and pictures of inside of the square as well.
My question is, I'm assuming because it's rounded in the corner to fit the load bolt, so it does remain in place during install right? I was comparing it to the factory diff cover and the vent holes just seem small to me, so I thought I'd ask folks with a little more experience with this cover or more experience dealing with differentials. Thank you in advance!
__________________
2011 Camaro 2SS/RS LS3
Mods: Kooks 1 7/8" LT Headers, CAI Intake w/ APEX Race Scoop, Bo White Ported Throttle Body, MGW Short Throw Shifter, Powerbond 25% Underdrive Pulley, Borla ATAK Catback, Full DSE suspension, Bilstein B6 shocks/struts, Yukon 4.11 gears, 1.25" drop Dyno Tuned by Brian Turner of Dyno Tune Motorsports |
|
|