sjm autoprod - Concept Afterburner Tail Lights - Page 72 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

agkelly73 · 09-26-2013, 06:49 AM

Caught someone driving behind me this morning snapping a pic of the tailights! Lol.

Sent from my zombie apocalypse bunker using my Droid RAZR HD.

Elykson · 09-28-2013, 07:52 PM

You don't have to drill out the welds for the inner lens. A flat head screw driver inserted through the back of the housing, with the head placed near the weld, allows you to hammer them loose.

sjmautoprod · 09-28-2013, 07:54 PM

Slick!

Elykson · 09-28-2013, 11:00 PM

For flicker wires, do I run both the blue and black wires out the back? What do I connect them to?

sjmautoprod · 09-29-2013, 07:41 AM

Yessir. Last page of the instructions: Blue to power and black to ground. If you want Flicker when the car is running, you just need to ground the black wires. When the car is not running, you also need to apply power to the blue wires.

UF4LIFE102SS · 09-29-2013, 03:30 PM

Quote:

Originally Posted by yotaman96

I thought I wanted the dark until I saw both in person. I like the dark better when the lights are off, but the light diffusers look better to me when the lights are on and that's what this mod is all about.

Again thanks for this post It's the 1 to get for sure!

sjmautoprod · 09-29-2013, 07:28 PM

Shot from the field from a two-car install. Only one pic. :(

EDIT: Second pic!

sjmautoprod · 11-05-2013, 07:40 AM

A few tweaks in the works for the next run...

UF4LIFE102SS · 11-08-2013, 05:35 PM

Not fair!

sjmautoprod · 11-08-2013, 06:45 PM

Oh, don't worry. Nothing noticeable... Yet.

S3XPanther · 11-11-2013, 01:35 AM

Quote:

Originally Posted by sjmautoprod

Oh, don't worry. Nothing noticeable... Yet.

Ok, I need these now. Please work faster.

alssiri · 01-10-2014, 10:48 AM

Ahmad

linkwpc · 01-10-2014, 11:11 AM

Any new news about pre made kits?

BiG_TiMe · 01-10-2014, 02:24 PM

Quote:

Originally Posted by linkwpc

Any new news about pre made kits?

09-28-2013, 07:52 PM	#996
Elykson Custom One Off Drives: 2010 Chicago Blackhawks Edition #1 Join Date: Oct 2010 Location: Madhouse on Madison Posts: 1,190	You don't have to drill out the welds for the inner lens. A flat head screw driver inserted through the back of the housing, with the head placed near the weld, allows you to hammer them loose. __________________ Vararam Intake/SLP Loud Mouth II/BBK LT HFC/Magnaflow x-pipe/Pfadt Springs/Black Ice-olator/FE3 suspension/VMAX TB/RX catch can/Trifecta Tune http://www.camaro5.com/forums/showthread.php?t=129416

09-28-2013, 11:00 PM	#998
Elykson Custom One Off Drives: 2010 Chicago Blackhawks Edition #1 Join Date: Oct 2010 Location: Madhouse on Madison Posts: 1,190	For flicker wires, do I run both the blue and black wires out the back? What do I connect them to? __________________ Vararam Intake/SLP Loud Mouth II/BBK LT HFC/Magnaflow x-pipe/Pfadt Springs/Black Ice-olator/FE3 suspension/VMAX TB/RX catch can/Trifecta Tune http://www.camaro5.com/forums/showthread.php?t=129416

09-29-2013, 07:28 PM	#1001
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Shot from the field from a two-car install. Only one pic. :( EDIT: Second pic! Attached Images Last edited by sjmautoprod; 09-29-2013 at 07:46 PM.

11-08-2013, 05:35 PM	#1003
UF4LIFE102SS Treasure Coast Camaro 5 Drives: 2010 2 SS Join Date: Nov 2010 Location: Vero Beach, FL. Posts: 4,239 View My Garage	Not fair! __________________

01-10-2014, 10:48 AM	#1006
alssiri Drives: 2017 ZL1 A10 Join Date: Aug 2009 Location: Dubai Posts: 1,250	Ahmad __________________ 2017 ZL1 A10 SW (SOLD) Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER.

09-26-2013, 06:49 AM	#995
agkelly73 Drives: 2016 SS Convertible Join Date: Jun 2009 Location: Hope Mills, NC Posts: 419	Caught someone driving behind me this morning snapping a pic of the tailights! Lol. Sent from my zombie apocalypse bunker using my Droid RAZR HD.

09-28-2013, 07:54 PM	#997
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Slick!

09-29-2013, 07:41 AM	#999
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Yessir. Last page of the instructions: Blue to power and black to ground. If you want Flicker when the car is running, you just need to ground the black wires. When the car is not running, you also need to apply power to the blue wires.

11-05-2013, 07:40 AM	#1002
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	A few tweaks in the works for the next run...

11-08-2013, 06:45 PM	#1004
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Oh, don't worry. Nothing noticeable... Yet.

01-10-2014, 11:11 AM	#1007
linkwpc The punching cat Drives: '10 Camaro SS Black W/Hugger&W/IOI Join Date: Nov 2007 Location: Torrance, CA Posts: 4,048 View My Garage	Any new news about pre made kits? __________________ My car build (COTW 7/23/12) - - - - - - > CLICK HERE! : http://www.camaro5.com/forums/showthread.php?t=80725

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAC afterburner tail lights	Berryp	Cosmetics and Lighting Modification Discussions	28	01-28-2012 04:18 PM
AAC's Afterburner Tail Lights	The Stig	Cosmetics and Lighting Modification Discussions	32	05-17-2011 02:42 PM
AAC Afterburner Tail Lights! PICS!	TXGooch21	Cosmetics and Lighting Modification Discussions	23	10-20-2010 09:47 AM
New tail lights?	2000v6	4th Generation Camaros	40	03-17-2010 03:07 AM