SSAVAGE VERT - Page 8

VAZL1 · 01-16-2019, 04:21 PM

Quote:

Originally Posted by ChadFarr

Let’s see what she does...

Car looks awesome but you should remove the ZL1 badge.

ChadFarr · 01-30-2019, 05:10 PM

Got another piece to the puzzle! Rods And Pistons are next and then everything will be complete... for a while Atleast lol

ChadFarr · 02-12-2019, 07:21 PM

MORE FUEL!!!!

ChadFarr · 02-15-2019, 11:37 PM

Looking To Upgrade Your Fuel System?

LT4 Injectors
https://dsxtuning.com/products/12684...fuel-injectors

LT4 HPFP
https://dsxtuning.com/products/12679...sure-fuel-pump
Alternative Part: HPM1036 By AC Delco

Aux Fuel Pump System
https://dsxtuning.com/products/auxil...or-2016-camaro

ChadFarr · 02-17-2019, 04:48 PM

So I did “a thang”... I went big wang! I was able to acquire an OEM ZL1 1LE Spoiler. Part # 84509432

ZL-Fifty · 03-14-2019, 09:38 AM

I have a 2017 2SS FIFTY, I just picked up the front clip from an 18 ZL1 and plan on swapping the entire front clip. Since you have already done this, do you have any advice from the lessons you learned during your build?

ChadFarr · 03-14-2019, 09:45 AM

Quote:

Originally Posted by ZL-Fifty

I have a 2017 2SS FIFTY, I just picked up the front clip from an 18 ZL1 and plan on swapping the entire front clip. Since you have already done this, do you have any advice from the lessons you learned during your build?

I recommend getting the ZL1 Rocker panels. Since the fenders are wider on the ZL1, the corners don’t sit flush. It’s not obvious BUT if you’re going all out, I’d add it. Everything is pretty much remove and reinstall.

ChadFarr · 04-15-2019, 03:45 PM

Went from ECS to Whipple 2.9L w/ RotoFab Big Gulp

VAZL1 · 04-15-2019, 04:22 PM

Sweet build! How do you like the DSX low side fuel pump? Also, what RWHP are you making now?

ChadFarr · 04-15-2019, 04:24 PM

Quote:

Originally Posted by VAZL1

Sweet build! How do you like the DSX low side fuel pump? Also, what RWHP are you making now?

Loving the low side pump. Only made 660/640 on a conservative tune bc I’m on stock bottom end. I plan to do Meth next week and then we can see what the car really can do. The Whipple demands ALOT of fuel!

VAZL1 · 04-15-2019, 06:31 PM

Quote:

Originally Posted by ChadFarr

Loving the low side pump. Only made 660/640 on a conservative tune bc I’m on stock bottom end. I plan to do Meth next week and then we can see what the car really can do. The Whipple demands ALOT of fuel!

Good to hear, I'm considering the low side myself, pretty much ran out at 640 rwhp. How do you like that PD blower over the centrifugal?

ChadFarr · 04-16-2019, 06:30 AM

Quote:

Originally Posted by VAZL1

Good to hear, I'm considering the low side myself, pretty much ran out at 640 rwhp. How do you like that PD blower over the centrifugal?

I love the PD Blower because of the instant torque and boost. Also, it fills the engine bay nicely. I prefer the Centrifugal bc I love the sound and blow off, I just hated how it had to build boost at 5K RPMS. The PD hits full boost about 2500 RPMs

ChadFarr · 06-03-2019, 03:45 PM

Going under the knife for the last time! Machine shop confirmed the GPI Rod/Piston set is a true complete drop-in! Everything was well within variance.

VAZL1 · 06-04-2019, 04:42 PM

Sweet....

01-30-2019, 05:10 PM	#100
ChadFarr Instagram: @SSAVAGEVERT Drives: 2016 SS M6 Vert Join Date: Jan 2016 Location: Houston, TX Posts: 659	Got another piece to the puzzle! Rods And Pistons are next and then everything will be complete... for a while Atleast lol __________________ 2.9L Whipple \| Compstar Rods, Diamond Pistons & GPI Cam \| Mantic Triple Disc \| Corsa Performance Exhaust \| DSX Aux Pump \| LT4 Fuel System \| BMR Lowering Springs \| ZL1 OEM Conversion \| 360 Customs Built \| And More! Click & Follow My Build

02-12-2019, 07:21 PM	#101
ChadFarr Instagram: @SSAVAGEVERT Drives: 2016 SS M6 Vert Join Date: Jan 2016 Location: Houston, TX Posts: 659	MORE FUEL!!!! __________________ 2.9L Whipple \| Compstar Rods, Diamond Pistons & GPI Cam \| Mantic Triple Disc \| Corsa Performance Exhaust \| DSX Aux Pump \| LT4 Fuel System \| BMR Lowering Springs \| ZL1 OEM Conversion \| 360 Customs Built \| And More! Click & Follow My Build

02-15-2019, 11:37 PM	#102
ChadFarr Instagram: @SSAVAGEVERT Drives: 2016 SS M6 Vert Join Date: Jan 2016 Location: Houston, TX Posts: 659	Looking To Upgrade Your Fuel System? LT4 Injectors https://dsxtuning.com/products/12684...fuel-injectors LT4 HPFP https://dsxtuning.com/products/12679...sure-fuel-pump Alternative Part: HPM1036 By AC Delco Aux Fuel Pump System https://dsxtuning.com/products/auxil...or-2016-camaro __________________ 2.9L Whipple \| Compstar Rods, Diamond Pistons & GPI Cam \| Mantic Triple Disc \| Corsa Performance Exhaust \| DSX Aux Pump \| LT4 Fuel System \| BMR Lowering Springs \| ZL1 OEM Conversion \| 360 Customs Built \| And More! Click & Follow My Build

02-17-2019, 04:48 PM	#103
ChadFarr Instagram: @SSAVAGEVERT Drives: 2016 SS M6 Vert Join Date: Jan 2016 Location: Houston, TX Posts: 659	So I did “a thang”... I went big wang! I was able to acquire an OEM ZL1 1LE Spoiler. Part # 84509432 __________________ 2.9L Whipple \| Compstar Rods, Diamond Pistons & GPI Cam \| Mantic Triple Disc \| Corsa Performance Exhaust \| DSX Aux Pump \| LT4 Fuel System \| BMR Lowering Springs \| ZL1 OEM Conversion \| 360 Customs Built \| And More! Click & Follow My Build

03-14-2019, 09:38 AM	#104
ZL-Fifty Drives: Camaro Fifty 2SS Join Date: Mar 2019 Location: Oklahoma Posts: 5	Advice I have a 2017 2SS FIFTY, I just picked up the front clip from an 18 ZL1 and plan on swapping the entire front clip. Since you have already done this, do you have any advice from the lessons you learned during your build?

04-15-2019, 03:45 PM	#106
ChadFarr Instagram: @SSAVAGEVERT Drives: 2016 SS M6 Vert Join Date: Jan 2016 Location: Houston, TX Posts: 659	SSAVAGE VERT Went from ECS to Whipple 2.9L w/ RotoFab Big Gulp __________________ 2.9L Whipple \| Compstar Rods, Diamond Pistons & GPI Cam \| Mantic Triple Disc \| Corsa Performance Exhaust \| DSX Aux Pump \| LT4 Fuel System \| BMR Lowering Springs \| ZL1 OEM Conversion \| 360 Customs Built \| And More! Click & Follow My Build

04-15-2019, 04:22 PM	#107
VAZL1 Drives: 17 ZL1 Join Date: Mar 2017 Location: VA Posts: 1,075	Sweet build! How do you like the DSX low side fuel pump? Also, what RWHP are you making now? __________________ 2017 ZL1 Coupe M6, Red Hot Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp

06-03-2019, 03:45 PM	#111
ChadFarr Instagram: @SSAVAGEVERT Drives: 2016 SS M6 Vert Join Date: Jan 2016 Location: Houston, TX Posts: 659	Going under the knife for the last time! Machine shop confirmed the GPI Rod/Piston set is a true complete drop-in! Everything was well within variance. __________________ 2.9L Whipple \| Compstar Rods, Diamond Pistons & GPI Cam \| Mantic Triple Disc \| Corsa Performance Exhaust \| DSX Aux Pump \| LT4 Fuel System \| BMR Lowering Springs \| ZL1 OEM Conversion \| 360 Customs Built \| And More! Click & Follow My Build

06-04-2019, 04:42 PM	#112
VAZL1 Drives: 17 ZL1 Join Date: Mar 2017 Location: VA Posts: 1,075	Sweet.... __________________ 2017 ZL1 Coupe M6, Red Hot Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp

User Name		Remember Me?
Password