01-25-2020, 11:03 AM | #15 |
Drives: 2023 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 417
|
Low side is always a good idea over 700 rwhp. With the cam all your high side worries are solved with a +38 fuel love.
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp, Jet Hot Coated ARH 2 inch LT's, Stainless Works NPP, Too High PSI Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, 295/30-315/30, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
01-26-2020, 06:45 AM | #16 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
I wonder what the Maggie 2300 would make on the stock 3.2 pulley with some cat deletes vs longtubes and a 103tb and Rotofab.
|
01-26-2020, 01:12 PM | #17 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,614
|
Nice Freudian there
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
01-26-2020, 02:29 PM | #18 |
Drives: 2023 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 417
|
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp, Jet Hot Coated ARH 2 inch LT's, Stainless Works NPP, Too High PSI Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, 295/30-315/30, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
01-26-2020, 02:31 PM | #19 |
Drives: 2023 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 417
|
650-675 pretty easy I would think. It would probably make same boost as mine or maybe a little more as I’m sure these 2 inch headers knock a little boost off mine.
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp, Jet Hot Coated ARH 2 inch LT's, Stainless Works NPP, Too High PSI Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, 295/30-315/30, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
01-26-2020, 04:44 PM | #20 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
|
01-26-2020, 05:05 PM | #21 |
Drives: 18 Tahoe RST, 19 Z06 Join Date: Apr 2017
Location: Colorado Springs, CO
Posts: 327
|
|
01-26-2020, 05:19 PM | #22 |
Account Suspended
Drives: 2017 Camaro ZL1 A10 Join Date: May 2012
Location: NJ
Posts: 7,692
|
If you don't mind, how much did all that cost? Approx...
I personally think 700+ to the wheels would make for a perfect car considering the weight and the A10 trans. This is probably as far as I would go. |
01-26-2020, 07:56 PM | #23 |
Drives: 2023 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 417
|
The blower itself is 5200 with the 103 inlet. I do all the install and tuning myself so I kinda cheat there. Lol. The car is a blast at 700 rwhp. And the big blower never gets hot so air temps stay in check so no power fall off when it gets warm.
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp, Jet Hot Coated ARH 2 inch LT's, Stainless Works NPP, Too High PSI Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, 295/30-315/30, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
01-27-2020, 08:48 AM | #24 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
I think the 2300 Heartbeat is perfect for this motor. Sure the 2650 is wicked but to fully take advantage of the extra power capability you really need to invest big in the fuel system. We've built a few of these already and with a cam and a low side 800rwhp+ is very obtainable. We can get you in one significantly cheaper then 5200 as well.
|
01-27-2020, 10:38 PM | #25 | |
Drives: 2023 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 417
|
Quote:
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp, Jet Hot Coated ARH 2 inch LT's, Stainless Works NPP, Too High PSI Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, 295/30-315/30, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
|
01-28-2020, 07:03 AM | #26 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,787
|
Hey guys, I was browsing this thread and noticed several references to “stock” or “supplied” 3.2/80mm upper pulleys. The gen 6 kit as delivered from Magnuson, I believe, comes with a 98mm pulley, at least mine did. I expect if you order from Magnuson, you can specify whatever size pulley you want. It’s possible that other vendors may also be willing to swap pulleys prior to shipping as well. I just thought I would throw this out to possibly save someone the grief of ordering an off-the-shelf kit and expecting it to arrive with an 80mm pulley installed.
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
01-28-2020, 08:07 AM | #27 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
Anyone know the boost levels for 98mm vs 80mm on stock cats for the Maggie 2300?
|
01-28-2020, 08:15 AM | #28 | |
Drives: 2023 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 417
|
Quote:
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp, Jet Hot Coated ARH 2 inch LT's, Stainless Works NPP, Too High PSI Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, 295/30-315/30, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
|
|
|
Post Reply
|
|
|