[unavailablezl1]

Great setup, let's see some slips.

[SlikZL1]

Originally Posted by RUQWIKR

Looks great! However, with stock studs, you're only at around 8mm thread engagement with 1/4" spacers. If leaving the spacers on, if it was my car, I'd put studs with longer thread engagement. Lots of posts about how to swap if you do a search.

If conventional lug nuts, normal rule, like for NHRA tech, would be 14mm minimum engagement - the diameter of the wheel stud. If shank-style lug nuts, you would need 14mm at least of engagement in the hex head itself.

Good point. I will look into that upgrade in the near future.

[SlikZL1]

Originally Posted by unavailablezl1

Great setup, let's see some slips.

This is the best so far. About 75whp/75wtq ago

[laynlo15]

Very good looking ride with the lowered stance

[laynlo15]

Good 60 ft

[SlikZL1]

Originally Posted by laynlo15

Good 60 ft

Thank you, hoping for a 1.3x next time out

[RAT Raceway]

Originally Posted by SlikZL1

Just wanted to show off a little bit and show you guys my new wheel setup. Not only does the car dead hook, but it drives great and really looks the part.

Also, car just made 749/772 stock heads/cam, pump 93, 100% meth and FBO Check out my buddy’s XXX ZL1’s post about it.

Front : 18x6 Weld Alumastar 2.0 w/ Mickey Thompson SR 28x6.00 18
Part number : 88B-1806255

Rear : 17x10 Weld S71 Beadlock W/ Mickey Thompson 305/45 street R
Part number : 71HB7100N72F

Also, I added a 1/4 inch spacer to all 4 corners. IMO, it provides the perfect stance.

Your car makes me wish I would have not gone ZLE and done a auto with a Drag package.


DROP DEAD SEXY!!!!!!!!!!!!!!!

[SlikZL1]

Originally Posted by RAT Raceway

Your car makes me wish I would have not gone ZLE and done a auto with a Drag package.


DROP DEAD SEXY!!!!!!!!!!!!!!!

Thanks for the compliment man! Put you a drag pack on ZLE, that would be next level cool

[mlee]

Originally Posted by RAT Raceway

Your car makes me wish I would have not gone ZLE and done a auto with a Drag package.


DROP DEAD SEXY!!!!!!!!!!!!!!!

I wasn't going to go there but thinking the same thing.

Originally Posted by SlikZL1

Thanks for the compliment man! Put you a drag pack on ZLE, that would be next level cool

Suspension just isn't made for drags... Way too stiff.

[2018ZL1]

Looks amazing!!!! Love it! I need to ditch my race stars and spend some $$$$!!!!

[SlikZL1]

Originally Posted by 2018ZL1

Looks amazing!!!! Love it! I need to ditch my race stars and spend some $$$$!!!!

Hey thanks! Nothing wrong with the stars, your ride looks good!

[2018ZL1]

Originally Posted by SlikZL1

Hey thanks! Nothing wrong with the stars, your ride looks good!

Stars... the poor mans drag setup! Thanks!

[ZL1Atlanta]

Looks great! I noticed that you used the 28x6x18 MT Sportsman tires. Any concerns with those tires having a recommendation of a max 5" wheel?

[laynlo15]

I've had Race Stars since 2016. Several different sets with different tire/slick/drag radial combos. They are actually just as light as the Welds and I lost 100 lbs of rolling weight when I went to the bias ply slicks and skinnies over the stock 20's.