09-12-2019, 10:31 AM | #113 | |
Drives: 2019 Camaro ZL1 Join Date: May 2019
Location: FL
Posts: 50
|
Quote:
Thanks
__________________
2019 Riverside Blue ZL1 M6, PDR
|
|
09-18-2019, 06:55 PM | #114 |
Drives: Chevrolet Camaro Join Date: Jul 2019
Location: FL
Posts: 6
|
I have had literally zero problems with them. They make a huge difference in light output from the stock. The backup camera is actually useful at night now with them.
|
03-15-2020, 03:41 PM | #115 |
Drives: 1of 66 Orange Crush 2020 ZL1’s Join Date: Dec 2016
Location: YYC
Posts: 108
|
These still working well for you? Will have to get a set for my 2020... Unreal GM puts LED's in almost everything but they cheep out on the reverse, license and trunk lights.
__________________
Dreaming of a 2020 A10Crush ZL1 *TPW Sept 30* Built November 14, 2019, shipped Nov 15, 2019. Arrived at the dealer January 29, 2020.
2013 CTSV coupe 6MT SOLD |
11-13-2020, 10:49 AM | #116 |
Drives: 23 ZL1 6speed Join Date: Aug 2020
Location: WI
Posts: 1,272
|
Did you end up trying those bulbs? Is there anything similar? $36 seems a little steep for two little bulbs..
|
10-25-2022, 10:06 AM | #117 |
Drives: 2019 Chevy Camaro 2SS 1LE Join Date: Dec 2021
Location: Indiana
Posts: 3
|
I installed the iJDM Toy bulbs and they work great. They have resistors pre-installed on the bulb harness. This is a great option if you don't want to install and fiddle with your own resistors.
|
11-14-2022, 02:53 PM | #118 |
Drives: 2022 Camaro 2SS Convertible Join Date: Mar 2022
Location: New Jersey
Posts: 26
|
Just got a pair of these from iJDMToy after picking up a set of (expensive) bulbs from Diode Dynamics. For 1/4 to a 1/5 of the price of the DD bulbs if you figure in the resistors, the iJDMToy bulbs are a bargain and are outstanding. Definitely a plug and play solution and highly recommended.
|
10-02-2023, 06:20 PM | #119 |
Drives: 2018 SS 1LE Join Date: Sep 2018
Location: Ohio
Posts: 143
|
Does anyone know the resistor specs on the gen5diy single resistor? I believe the resistor on mine is bad cause the backup cam just stays on now. Haven’t been a problem since until recently.
EDIT: I found it, 50w 3 ohms Last edited by oOKhanhOo; 10-04-2023 at 01:15 PM. |
10-30-2023, 03:06 AM | #120 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
Although it's an old thread, thank you OP for the detailed write up. As things have evolved a bit, would a led bulb that includes a load resistor be used instead? See below for an example:
https://www.ebay.co.uk/itm/304792111...mis&media=COPY
__________________
Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it
Mosaic black 2018 Camaro 2SS A8 (sold) |
10-30-2023, 10:31 AM | #121 | |
Drives: 23 2SS 1LE Join Date: Feb 2019
Location: GA
Posts: 569
|
Quote:
I used regular halogens on my last Camaro that were just bright white. They LOOKED like LEDs and im upset they aren't made anymore. Im mad that I forgot to switch them out for the stock bulbs before trading it in so I could use the good ones on my new Camaro. Im sure there are similar options but I have been too lazy to find them lol.
__________________
Instagram: RideWithDanger
Radiant Red 23' 2SS 1LE 1100: 11/14/22 | BUILT: 3/16/23 2000: 2/17/23 | 4200: 5/8/23 3000: 2/27/23 | 5000/6000: 5/15/23 Black on black 2019 3LT RS Camaro. 1100: 3/7/19 | 4200: 4/15/19 3100: 3/15/19 | 4800: 4/23/19 3400: 3/22/19 | 5000: 4/25/19 Built: 4/8/19 | Home: 4/26/19 |
|
10-30-2023, 02:01 PM | #122 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,605
|
Quote:
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 Last edited by arpad_m; 10-30-2023 at 02:13 PM. |
|
10-31-2023, 08:13 AM | #123 | |
Drives: LT1 Join Date: Mar 2022
Location: Florida
Posts: 121
|
Quote:
https://store.ijdmtoy.com/products/c...stay-lit-issue |
|
10-31-2023, 01:41 PM | #124 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
Thanks for posting the above link. Where did you mount the resistors? Can you post a photo?
__________________
Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it
Mosaic black 2018 Camaro 2SS A8 (sold) |
11-01-2023, 08:29 AM | #125 |
Drives: LT1 Join Date: Mar 2022
Location: Florida
Posts: 121
|
Sure thing, I used double-sided thermal conductive tape and mounted it to the metal. This image was taken before cable routing so disregard the mess.
|
11-01-2023, 08:54 AM | #126 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
Thanks David.
__________________
Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it
Mosaic black 2018 Camaro 2SS A8 (sold) |
|
|
Post Reply
|
|
|