10-14-2019, 07:52 AM | #113 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,343
|
They will I give them the entire dash and I think matte finish will be available to.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
10-14-2019, 08:32 AM | #114 |
Drives: 19 Camaro SS Join Date: May 2015
Location: TN
Posts: 216
|
I'm in for a matte finish
|
10-14-2019, 03:26 PM | #115 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,343
|
These came in but i need to get over to pick up.. my cars been at the tuners getting port injection on my 2650.. looks like they started on it today..
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
10-14-2019, 04:47 PM | #116 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
Matte and I am SOLD
|
10-14-2019, 05:52 PM | #117 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,343
|
Even if they don't offer in matte you can have it done cheap or yourself.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
10-16-2019, 10:15 AM | #118 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
How's that..
|
10-16-2019, 10:44 AM | #119 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,343
|
Uh matte spray paint
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
10-17-2019, 05:55 AM | #120 |
Drives: Camaro ZL1 A10, F-Type R, RR Sport Join Date: Jul 2016
Location: Albania
Posts: 216
|
How much time does the damn R&D take for a small steering wheel trim jesus christ
|
10-17-2019, 01:46 PM | #121 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
|
10-21-2019, 05:37 PM | #122 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,343
|
Pics are the best installed these at the shop doing my port injection on my 2650 blower.. sorry it was dark and on the lift.
Knee pads Door pads Full replacement gear shift bezel
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
11-26-2019, 12:53 PM | #123 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,343
|
Just got to see some pics of the complete console looks pretty amazing will post when test fitted!
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
11-30-2019, 11:26 AM | #124 |
Drives: '19 ZL1 1LE Summit White M6, PDR Join Date: May 2019
Location: Anderson, In
Posts: 89
|
EDF how satisfied with the 1LE front end pieces are you? How well does it match up to the hood and wing CF?
|
11-30-2019, 04:27 PM | #125 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,343
|
The fit and quality is perfect just like any carbon part its fragile where the clips are concerned. Phastek is local and they had the same set by Anderson's hanging on the wall that a customer had returned from broken clips. I had 1 clip in the bezel break but as you will see it's a over kill on the design it's not going anywhere. anyhow just getting the OEM's removed will be the hardest part reassembly is easy.
The carbon is pretty straight and not stretched looking on bends. Make sure to get the parts ceramic coated w like xpel. Or some protection. It looks close enough to the GM texture and color. Only the GM interior dash insert doesn't match well with any carbon I have seen. So when trufiber dash insert is ready I'll sell my OEM carbon piece so it all matches perfectly.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
11-30-2019, 05:51 PM | #126 |
Drives: '19 ZL1 1LE Summit White M6, PDR Join Date: May 2019
Location: Anderson, In
Posts: 89
|
Thanks for the reply. They look great in the pics, and Trufiber is significantly less expensive than Anderson Composites.
|
|
|
Post Reply
|
Thread Tools | |
|
|