04-05-2017, 04:09 PM | #1 |
Drives: 2017 Camaro 1SS Join Date: Dec 2016
Location: London, Canada
Posts: 37
|
Camaro Emblem Replacement....
okay, ive looked everywhere, i bought a second set of bowties, i am dipping them in carbon fibre, just wanna know how to properly replace them, i am new to the camaro, just picked up a 2017 1SS, put 700km on it and loving every one, just looking for some help please!!!
|
04-05-2017, 05:11 PM | #2 |
Drives: 2016 Camaro 1LT Join Date: Apr 2016
Location: Phoenix, AZ
Posts: 648
|
LOL...I hate the search function on this site but there are probably 30 different threads on this. The rear bowtie is held on by adhesive tape. Just warm it with a blowdryer and use fishing line to separate from the trunk. Then you can use Goo Gone to remove the leftover adhesive.
The front is attached to the grille with clips. You should be able to see these if you have the spare one for reference. There are multiple options on how to remove. The easiest is with a plastic trim tool and some WD40. Just spray the lube in between the bowtie and grille and then pry from the left side. It will start to come off and you can pull the rest of the way. Some other people have been able to reach into the grille and get the tabs to release. Or go through the radiator shroud and get to the tabs. Last edited by pjz1082; 04-05-2017 at 05:51 PM. |
04-05-2017, 05:30 PM | #3 |
Drives: 2016 Camaro 1LT Join Date: Apr 2016
Location: Phoenix, AZ
Posts: 648
|
|
|
|
Post Reply
|
|
|