Question for 2” Kooks headers and green cats - AWE

CW3SF · 03-08-2021, 12:44 PM

I have a full AWE system after the primary cats,.. link pipes, resonated mid pipes and Touring catback. Will the Kooks headers and green cats bolt up to the AWE kit or will it require welding, fabbing, exhaust shop work?

CW3SF · 03-08-2021, 12:56 PM

I’m thinking it should be close to aligning if the link pipes are left off with the headers.

JonDaddy82 · 03-08-2021, 01:43 PM

Exhaust shop will be needed.

PROMETHEUS · 03-08-2021, 02:39 PM

There will be some fabrication required. Even with the link pipes, they will not line up. Unfortunately as per AWE rep, there is no header out there that lines up with their systems.

jaybee924 · 03-08-2021, 07:50 PM

Quote:

Originally Posted by PROMETHEUS

There will be some fabrication required. Even with the link pipes, they will not line up. Unfortunately as per AWE rep, there is no header out there that lines up with their systems.

AWE!!!

Z OH 6 · 03-08-2021, 08:17 PM

If its cut right, no additional pipe should be needed. I had a full AWE catback exhaust before I took my car to Vengeance Racing to have the Kooks 2" headers and green cats installed, they didn't have to add any pipe.

CW3SF · 03-08-2021, 08:24 PM

Quote:

Originally Posted by Z OH 6

If its cut right, no additional pipe should be needed. I had a full AWE catback exhaust before I took my car to Vengeance Racing to have the Kooks 2" headers and green cats installed, they didn't have to add any pipe.

Nice. This is the info I’m looking for. Appreciate it.

Z OH 6 · 03-08-2021, 08:33 PM

Quote:

Originally Posted by CW3SF

Nice. This is the info I’m looking for. Appreciate it.

I will say this though, my tips use to stick out a little further than they do now, VR had to pull the exhaust forward some to make them fit the cat pipes, but it honestly looks better now, the tips don't stick out quite as far and are tucked flush with the rear fascia.

03-08-2021, 12:44 PM	#1
CW3SF Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019 Location: Sea level Posts: 1,252 View My Garage	Question for 2” Kooks headers and green cats - AWE I have a full AWE system after the primary cats,.. link pipes, resonated mid pipes and Touring catback. Will the Kooks headers and green cats bolt up to the AWE kit or will it require welding, fabbing, exhaust shop work? __________________ Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50

03-08-2021, 12:56 PM	#2
CW3SF Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019 Location: Sea level Posts: 1,252 View My Garage	I’m thinking it should be close to aligning if the link pipes are left off with the headers. __________________ Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50

03-08-2021, 01:43 PM	#3
JonDaddy82 Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017 Location: Nolensville, TN Posts: 618	Exhaust shop will be needed. __________________ 1989 Forumla 350 WS6 <- High School 2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily

03-08-2021, 02:39 PM	#4
PROMETHEUS Drives: 2019 ZL-1, Shadow Gray, Sold Join Date: Jan 2019 Location: Fredericksburg, VA Posts: 1,390	There will be some fabrication required. Even with the link pipes, they will not line up. Unfortunately as per AWE rep, there is no header out there that lines up with their systems.

03-08-2021, 08:17 PM	#6
Z OH 6 Drives: 2021 Red Hot ZL1 Join Date: Sep 2020 Location: Gapplebees Posts: 3,078	If its cut right, no additional pipe should be needed. I had a full AWE catback exhaust before I took my car to Vengeance Racing to have the Kooks 2" headers and green cats installed, they didn't have to add any pipe.

User Name		Remember Me?
Password