WTB full set of Brembos - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

My Caroline · 05-02-2015, 10:04 AM

Hello all, I'm looking to buy a full set of brembos for my V6.
I need brake work and have decided that, for the cost of repair, I am going to upgrade.

I'm not interested in entertaining any dreamers.
Realistic sellers only, must be turn key, including Calipers, lines, and rotors as well as all hardware necessary to complete the install.

Pads would be a plus, but I understand many dispose of them.

Send your offers my way.

Best,
R

Blownfogger540 · 05-02-2015, 10:35 AM

im taking off mine 2011 SS 25k to go to zl1
front rotors and pads have under 8k

just make me a offer Tx is not bad to ship to but still heavy parts

cms · 05-02-2015, 02:27 PM

I have a set front and rear Brembo drilled rotors. Part #'s (#33S50198 & #33S50199). Approximately just under 6000 miles. Took them off my SS before I upgrade to the ZL1. Make me an offer if you're interested and I also live here in Texas. Thanks.

rocknroll_jeph · 05-02-2015, 10:15 PM

Hello, I hope that I am not going to jack your thread, but I am also considering doing this to my 2011 V6. I live in a country where a lot of things are blocked (including youtube and other online streaming video sites) so I have had trouble doing research for all that is needed to do the swap. Will you be or could you make a "how to" thread. I haven't been able to find any and really don't know all the specific things needed. Thanks and sorry for going off topic!

backeddy · 05-04-2015, 12:17 AM

hey jeph, are the embedded you tube videos on this site viewable? that would be good to know...

rocknroll_jeph · 05-04-2015, 12:38 AM

Quote:

Originally Posted by backeddy

hey jeph, are the embedded you tube videos on this site viewable? that would be good to know...

Youtube is completely blocked where I live, many pictures also don't come up when they are posted from other websites too...

I'm just looking for the specific parts needed to upgrade the brakes and simple instructions really. I could also wait until I get back this summer to research.

Thanks! And sorry again for jacking the thread.

05-02-2015, 10:04 AM	#1
My Caroline Drives: Black 2011 Camaro LS Join Date: Feb 2011 Location: Texas Posts: 1,694	WTB full set of Brembos Hello all, I'm looking to buy a full set of brembos for my V6. I need brake work and have decided that, for the cost of repair, I am going to upgrade. I'm not interested in entertaining any dreamers. Realistic sellers only, must be turn key, including Calipers, lines, and rotors as well as all hardware necessary to complete the install. Pads would be a plus, but I understand many dispose of them. Send your offers my way. Best, R __________________ White Fender Hashes from Big Worm Graphix with Custom White Bowties GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs

05-02-2015, 10:35 AM	#2
Blownfogger540 Drives: 2013 ZL1 416 Join Date: Feb 2013 Location: Langley B.C Posts: 2,619	im taking off mine 2011 SS 25k to go to zl1 front rotors and pads have under 8k just make me a offer Tx is not bad to ship to but still heavy parts

05-02-2015, 02:27 PM	#3
cms Drives: ZL1 Camaro Join Date: Oct 2012 Location: Denton Posts: 40 View My Garage	I have a set front and rear Brembo drilled rotors. Part #'s (#33S50198 & #33S50199). Approximately just under 6000 miles. Took them off my SS before I upgrade to the ZL1. Make me an offer if you're interested and I also live here in Texas. Thanks.

05-02-2015, 10:15 PM	#4
rocknroll_jeph Drives: 11 Camaro V6 RS, 03 BMW Z4 Join Date: Oct 2013 Location: Beijing & Michigan Posts: 476 View My Garage	Hello, I hope that I am not going to jack your thread, but I am also considering doing this to my 2011 V6. I live in a country where a lot of things are blocked (including youtube and other online streaming video sites) so I have had trouble doing research for all that is needed to do the swap. Will you be or could you make a "how to" thread. I haven't been able to find any and really don't know all the specific things needed. Thanks and sorry for going off topic!

05-04-2015, 12:17 AM	#5
backeddy Banned Drives: 2011 Boxster Spyder (best car ever) Join Date: Aug 2014 Location: San Jose, Ca Posts: 1,529	hey jeph, are the embedded you tube videos on this site viewable? that would be good to know...