2650R, 2" LTs & off-road just WAY too loud for me, solution. - Page 2

Sakudog · 05-29-2020, 12:03 PM

Link to video for my seats, many have asked.

Alain · 05-29-2020, 02:11 PM

Quote:

Originally Posted by Sakudog

SchraderPerformance seat delete kit for 2016+ Camaro

https://www.shraderperformance.com/s...r-seat-delete/

Thanks for the link !! Reasonably priced !!

How do you like the fit and finish?

Sakudog · 05-29-2020, 02:33 PM

Quote:

Originally Posted by Alain

Thanks for the link !! Reasonably priced !!

How do you like the fit and finish?

It is a great kit. There are some minor areas where it could be improved but not in fit & finish but they are minor complaints. It does look very OEM/GT3ish.

alssiri · 06-07-2020, 07:59 AM

Thanks for the great idea, I just finished installing the MagnaFlow muffler (12469) .
It did a lot in smoothing the exhaust tone

Ahmad

900RFWN · 06-07-2020, 10:05 AM

Quote:

Originally Posted by alssiri

Thanks for the great idea, I just finished installing the MagnaFlow muffler (12469) .
It did a lot in smoothing the exhaust tone

Ahmad

Did you remove your resonators and add the muffler or kept it all?

UFDUB · 06-07-2020, 11:31 AM

Who did your install and tune, if you don’t mind me asking? Also, the exhaust welding work looks spot on!

alssiri · 06-07-2020, 02:09 PM

Quote:

Originally Posted by 900RFWN

Did you remove your resonators and add the muffler or kept it all?

I removed the resonators.

Ahmad

DFW_Muscle · 06-08-2020, 09:15 PM

Quote:

Originally Posted by UFDUB

Who did your install and tune, if you don’t mind me asking? Also, the exhaust welding work looks spot on!

You've been asked twice now...let it out!

Sakudog · 06-09-2020, 01:24 PM

Quote:

Originally Posted by DFW_Muscle

You've been asked twice now...let it out!

Advanced Modern Performance did the install & tune.

Walker Pro Motorsport did the exhaust work.

CBren · 06-09-2020, 07:49 PM

In your first photo is that photo editing to make it appear like that? If not, that blue definitely doesn't look stock. Absolutely amazing looking color. Do you know the name of that blue? Planning on wrapping my car soon and blue is the path I'm leaning towards and dang that looks amazing.

Sakudog · 06-10-2020, 02:14 PM

Quote:

Originally Posted by CBren

In your first photo is that photo editing to make it appear like that? If not, that blue definitely doesn't look stock. Absolutely amazing looking color. Do you know the name of that blue? Planning on wrapping my car soon and blue is the path I'm leaning towards and dang that looks amazing.

The photographer added a lot of contrast, but the color is very dark blue, it's called Riverside Metallic. Thanks!

DFW_Muscle · 06-11-2020, 10:30 AM

Quote:

Originally Posted by Sakudog

Advanced Modern Performance did the install & tune.

Walker Pro Motorsport did the exhaust work.

I have heard mostly good things about AMP despite the oil filter incident 2 years ago.

kropscamaro16 · 06-11-2020, 10:41 AM

so why no cage/harnesses yet?

SFV1LE · 06-11-2020, 04:48 PM

I like your mods... the engine bay looks great from a functional standpoint and I like how you went with just a 2650, catch cans, and apparently not much more. Keep it simple and you have reliability and low engine temps without a lot of new potential points of failure.

The 93 tune is a good idea too, but I'd be tempted to add a 100 octane tune with it available at every track. I should know this, but do the standard ZL1 tuning tools allow for map switching on the fly?

06-07-2020, 07:59 AM	#18
alssiri Drives: 2017 ZL1 A10 Join Date: Aug 2009 Location: Dubai Posts: 1,250	Thanks for the great idea, I just finished installing the MagnaFlow muffler (12469) . It did a lot in smoothing the exhaust tone Ahmad __________________ 2017 ZL1 A10 SW (SOLD) Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER.

06-11-2020, 10:41 AM	#27
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,813	so why no cage/harnesses yet? __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

06-07-2020, 11:31 AM	#20
UFDUB Drives: Chevrolet Camaro ZL1 1LE Join Date: Jun 2019 Location: Florida Posts: 127	Who did your install and tune, if you don’t mind me asking? Also, the exhaust welding work looks spot on!

06-09-2020, 07:49 PM	#24
CBren Drives: 2017 ZL1 M6 Join Date: Sep 2019 Location: Fort Bliss, Texas Posts: 54	In your first photo is that photo editing to make it appear like that? If not, that blue definitely doesn't look stock. Absolutely amazing looking color. Do you know the name of that blue? Planning on wrapping my car soon and blue is the path I'm leaning towards and dang that looks amazing.

06-11-2020, 04:48 PM	#28
SFV1LE Drives: 2018 Hyper Blue ZL1 1LE Join Date: Dec 2018 Location: CA Posts: 1,360	I like your mods... the engine bay looks great from a functional standpoint and I like how you went with just a 2650, catch cans, and apparently not much more. Keep it simple and you have reliability and low engine temps without a lot of new potential points of failure. The 93 tune is a good idea too, but I'd be tempted to add a 100 octane tune with it available at every track. I should know this, but do the standard ZL1 tuning tools allow for map switching on the fly?

User Name		Remember Me?
Password