Wheels are on! - Page 2

waterman · 02-01-2018, 09:57 PM

OH baby!

Great look! Brakes look amazing behind those wheels.

MOSAIC BLACK 1LE · 02-01-2018, 10:57 PM

Looks great. Do you know what offset the wheels are??

kttxz06 · 02-01-2018, 11:36 PM

Quote:

Originally Posted by MOSAIC BLACK 1LE

Looks great. Do you know what offset the wheels are??

Fronts are stock I believe. Rears +32

kttxz06 · 02-01-2018, 11:37 PM

Quote:

Originally Posted by waterman

OH baby!

Great look! Brakes look amazing behind those wheels.

I know, it's crazy. You can see everything.

WEAPON-X · 02-02-2018, 08:52 AM

Quote:

Originally Posted by likerage

That looks gorgeous. My wife would have 2 of them curbed by the end of the week.

you and me both... I put 22" 360 Forged MESH7s on my wife's Range Sport SC and every couple of months I get the paint pen out after my detailer is done with it. Of course she SWEARS she doesn't know how it happened. I was going to get them repowdered, but now I think I'm just going to spare myself the future frustration

kttxz06 · 02-02-2018, 09:38 AM

Quote:

Originally Posted by WEAPON-X

you and me both... I put 22" 360 Forged MESH7s on my wife's Range Sport SC and every couple of months I get the paint pen out after my detailer is done with it. Of course she SWEARS she doesn't know how it happened. I was going to get them repowdered, but now I think I'm just going to spare myself the future frustration

Bwahahahahaha OMG dude. So funny. Well, the story that is. Not what happened to the wheels.

Reminds me of one of my employees. Her and her hubby just bought a new Accord. Literally the first week she curb checked them. She told her hubby............someone must of backed into her. The sad part.........He bought it. Now you know why she works for me and not him.

Victoryred1le · 02-02-2018, 09:48 AM

Quote:

Originally Posted by WEAPON-X

you and me both... I put 22" 360 Forged MESH7s on my wife's Range Sport SC and every couple of months I get the paint pen out after my detailer is done with it. Of course she SWEARS she doesn't know how it happened. I was going to get them repowdered, but now I think I'm just going to spare myself the future frustration

My Wife is the best actress on earth whenever any of our cars come home with curb rashed wheels

hawk02 · 02-02-2018, 09:48 AM

Quote:

Originally Posted by kttxz06

Pic in my garage. What do ya'll think? Needs to settle? Other than that, I think they sit fine.

Wheels look great!

I don't know that they need to settle as much as it looks like the front wheels aren't tucked inside the fender as much as the OEM. Could just be the angle of the photos.

Here's a recent photo I took of my HRE wheels. Looks like my front wheels are tucked a little more inside the fender. Rear wheels looks to have the same fender tuck as yours.

Victoryred1le · 02-02-2018, 09:52 AM

Quote:

Originally Posted by kttxz06

Fronts are stock I believe. Rears +32

Strasse did just a little extra offset on mine to sit them flush once i lowered it.

kttxz06 · 02-02-2018, 11:05 AM

Quote:

Originally Posted by hawk02

Wheels look great!

I don't know that they need to settle as much as it looks like the front wheels aren't tucked inside the fender as much as the OEM. Could just be the angle of the photos.

Here's a recent photo I took of my HRE wheels. Looks like my front wheels are tucked a little more inside the fender. Rear wheels looks to have the same fender tuck as yours.

No, my fronts are tucked. It's the angle. My rears are completely flush with the fenders. Like lined up perfectly. My issue is the clearance. I still have too much wheel gap for my liking, but I think that is me just over thinking it. I went out this morning to check on it and it seems to be not as high as yesterday. It's prob me being overly mental about it. haha. I still need about a 1/4 inch drop. I don't think anyone would come up to me and say, dude, you have too much wheel gap. I'm just being super super stickler about it I guess. I'll go out and measure the clearance real quick.................please hold.

kttxz06 · 02-02-2018, 11:08 AM

I have 1.5 inch clearance in front. 1.75 inch clearance in rear. I measured from the top of the edge of the tire to the bottom edge of the fenders.

On way to get my E85!!!!!!!!! I'll post up my new numbers later tonight.

V8SS · 02-02-2018, 11:18 AM

Looks great!!

Cheab · 02-02-2018, 12:45 PM

Have a link to where one could get these rims? I really hate the stocks. I have the same color and I've blacked all of the lights out so these would look great.

SoCal Racer · 02-02-2018, 01:06 PM

I think it was worth the wait

02-01-2018, 09:57 PM	#15
waterman Drives: Grandad's C2 L89 Join Date: May 2017 Location: 2051.50N 15629.60W Posts: 1,711	OH baby! Great look! Brakes look amazing behind those wheels. __________________ 2018 ZL1 1LE sw/PDR

02-02-2018, 11:08 AM	#25
kttxz06 Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016 Location: Katy Posts: 2,104	I have 1.5 inch clearance in front. 1.75 inch clearance in rear. I measured from the top of the edge of the tire to the bottom edge of the fenders. On way to get my E85!!!!!!!!! I'll post up my new numbers later tonight. __________________ There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.

02-01-2018, 10:57 PM	#16
MOSAIC BLACK 1LE Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017 Location: SOUTHERN CALIFORNIA Posts: 118	Looks great. Do you know what offset the wheels are??

02-02-2018, 11:18 AM	#26
V8SS Drives: 2017 M6 NFG Join Date: Jul 2016 Location: Los Angeles Posts: 214	Looks great!!

02-02-2018, 12:45 PM	#27
Cheab Drives: 2018 ZL1 Join Date: Oct 2016 Location: Atlanta Posts: 2	Have a link to where one could get these rims? I really hate the stocks. I have the same color and I've blacked all of the lights out so these would look great.

02-02-2018, 01:06 PM	#28
SoCal Racer Drives: C4,C6 Z06,Silverado,'17 Red Hot ZL1 Join Date: Aug 2016 Location: SoCal Posts: 463	I think it was worth the wait

User Name		Remember Me?
Password