[ryan01]

I don't have NPP, but I watched so many youtube videos trying to decide between borla s type & atak. I went with atak because I don't plan on any other exhaust mods and figured in the long run I would like the more aggressive tone. I couldn't be happier with the exhaust. Here's a vid after I got it installed.

[enzia35]

Originally Posted by dmcmahan60

There are a YouTube videos for the Track and Touring Edition AWE exhaust systems.
And almost 2k for that Borla System? No thanks.

AWE doesn't keep NPP function though. A similar Borla system is cheaper.

[s346k]

https://youtu.be/_eG3kt80M68


https://youtu.be/l_HQzX3soeE

??

[CHV2SS]

Originally Posted by dmcmahan60

There are a YouTube videos for the Track and Touring Edition AWE exhaust systems.
And almost 2k for that Borla System? No thanks.

cant really watch youtube at my current location it doesnt even load so ill wait till i get back to cali

[dmcmahan60]

Originally Posted by enzia35

AWE doesn't keep NPP function though. A similar Borla system is cheaper.

You are correct but the original poster has not been on since to say. They all sound great. And Steve at the RDPStore.com will match and or beat anybody's price.

[oldman]

my two favorite exhaust options. I actually like 2 and 3/4 systems and the Corsa is. Only the piecemeal Borla is 2 and 3/4. If money no problem I'd have to go with Corsa as it is a technology marvel for resonance tuning...

[enzia35]

Originally Posted by dmcmahan60

You are correct but the original poster has not been on since to say. They all sound great. And Steve at the RDPStore.com will match and or beat anybody's price.

I bought mine from Juiced Motorsports and enjoyed their great service. Heard lots of great things from Steve also.

[L8Apex]

Originally Posted by CHV2SS

please advise, i have a 2ss 2019 dual tip (non-npp) and im planing to have a quad tip, any suggestion which borla exhaust system if best without changing the rear diffuser just yet. coz im low on my budget.
is this one will work?
https://www.borla.com/products/camar...__11925cb.html

You will have to change the diffuser if you go from a dual to a quad tip. I just did this myself, went with an aftermarket diffuser and the Borla S-Type axle back. Cold start is loud as hell, but after that, it really sounds unbelievable, decel pops and crackles on downshift are a nice bonus.

[19 2SS]

I have a Borla atak axle back installed and love it

[Azerlazer26]

Would it be possible to get some axle back exhaust videos? I’d love to hear some cold starts/revs/or even drive by vids!

[CHV2SS]

Originally Posted by L8Apex

You will have to change the diffuser if you go from a dual to a quad tip. I just did this myself, went with an aftermarket diffuser and the Borla S-Type axle back. Cold start is loud as hell, but after that, it really sounds unbelievable, decel pops and crackles on downshift are a nice bonus.

where did you get your diffuser?

[Drizzt ss]

Originally Posted by CHV2SS

where did you get your diffuser?

I got love tapped a few months ago and got mine from next-gen speed.

The diffuser looked great and the paint was great(no orange peel or anything). It was packed well and fast shipping. I liked it so much I bought my front lip spoiler and side skirts from them too with the same results. I can’t figure out how to post the link, sorry. I’m just a simple cave man....

[CHV2SS]

Originally Posted by Drizzt ss

I got love tapped a few months ago and got mine from next-gen speed.

The diffuser looked great and the paint was great(no orange peel or anything). It was packed well and fast shipping. I liked it so much I bought my front lip spoiler and side skirts from them too with the same results. I can’t figure out how to post the link, sorry. I’m just a simple cave man....

good info enough lol thanks

[staples87]

Originally Posted by Drizzt ss

Did you eliminate the secondary cats yourself or had it done by a shop? Last quote I got for that was $200 which I thought was crazy. The other mainstream shops wouldn’t do it because they hear “cats” and say no.

Sorry for the late response. I had a friend of mine who has a shop do it for me. It took him about 3 hours because he took his time pulling the primary and secondary cats off then cut and welding to make sure the TIG welds were clean and there weren't any leaks.