Texas Speed aluminium intake manifold.

RobbyBeefcake87 · 06-10-2020, 02:53 PM

https://youtu.be/Mq7STv_SbR0

Suppoedly there is an LT version in the works, soon to come out (box even said ls/lt). Would be nice to have something that fits under the hood or atleast doesn't require cutting the plastic over the firewall.

DorkMissile · 06-10-2020, 03:12 PM

The video with the intercooler built in was more impressive

shootnjunky · 06-10-2020, 03:15 PM

they stated in their comments below that they currently have a prototype one on their 6th gen, so it appears it will work

6spdhyperblue · 06-10-2020, 04:00 PM

Nice !

RobbyBeefcake87 · 06-10-2020, 04:04 PM

Quote:

Originally Posted by shootnjunky

they stated in their comments below that they currently have a prototype one on their 6th gen, so it appears it will work

Yea they confirmed it in the comments on top of the box print being a bit of an easter egg.

Trochoidal · 06-10-2020, 05:44 PM

Quote:

Originally Posted by RobbyBeefcake87

https://youtu.be/Mq7STv_SbR0

Suppoedly there is an LT version in the works, soon to come out (box even said ls/lt). Would be nice to have something that fits under the hood or atleast doesn't require cutting the plastic over the firewall.

Good post. Hopefully the LT1 version fits under the hood like mentioned in the comments.

squish72 · 06-12-2020, 03:49 PM

I would have liked a hair longer runners for my car but it sure looks good.

Bohanan23 · 06-12-2020, 03:56 PM

problem is, sufficient runner length are similar to the high ram.. which require hood cut. MSD is a good contender but high ram out runs it up top. simply no way around it for sufficient runner length. But I am curious to see what TSP has in the works for another intake

squish72 · 06-12-2020, 04:21 PM

Quote:

Originally Posted by Bohanan23

problem is, sufficient runner length are similar to the high ram.. which require hood cut. MSD is a good contender but high ram out runs it up top. simply no way around it for sufficient runner length. But I am curious to see what TSP has in the works for another intake

Yeah I understand that. I was wanting the hi-ram and currently have a rotofab, I think it's doable with the rotofab. I think the tubing needs modifying. My main concern is if I go with a different hood, the rotofab won't seal against the hood and suck hot air. Where if I was to cut the hood then I wouldn't have that problem I'd just have hole in the hood.

So maybe this will be what I will end up doing. Time will tell I guess

Bohanan23 · 06-12-2020, 04:38 PM

I've seen a couple guys use stock tube and roto box with high ram. Im currently using stock tube and roto box with stock mani

RobbyBeefcake87 · 06-12-2020, 08:42 PM

Quote:

Originally Posted by Bohanan23

problem is, sufficient runner length are similar to the high ram.. which require hood cut. MSD is a good contender but high ram out runs it up top. simply no way around it for sufficient runner length. But I am curious to see what TSP has in the works for another intake

I'm very curious myself. If it could get close to high ram performance with a good fit I think its a win. As great as the high ram is in terms of runner length, I'm sure in terms of plenum volume and the neck of the opening itself there's room for the TxS intake to improve on.

BigGuy81 · 07-12-2020, 11:16 PM

Now this is definitely something to keep an eye on.

cmitchell17 · 07-15-2020, 11:29 PM

So people are thinking that we can hook this texas speed manifold up to the stock airintake or a rotofab intake and it clear the stock hood? I thought we were basically screwed on an intake unless you go to an taller hood? or is that more a C7 problem?

RobbyBeefcake87 · 07-18-2020, 10:01 AM

Quote:

Originally Posted by cmitchell17

So people are thinking that we can hook this texas speed manifold up to the stock airintake or a rotofab intake and it clear the stock hood? I thought we were basically screwed on an intake unless you go to an taller hood? or is that more a C7 problem?

Texas speed guys said it would clear on a 6th gen hood when I asked them.

06-10-2020, 02:53 PM	#1
RobbyBeefcake87 Drives: 2018 Camaro SS 1LE Join Date: Aug 2018 Location: Tampa Florida Posts: 1,980	Texas Speed aluminium intake manifold. https://youtu.be/Mq7STv_SbR0 Suppoedly there is an LT version in the works, soon to come out (box even said ls/lt). Would be nice to have something that fits under the hood or atleast doesn't require cutting the plastic over the firewall. __________________ 2000 Miata - aventi storm wheels, roll bar. 2019 Mustang GT pp1 - svt pp2 wheels, mbrp cat back, sync 3 upgrade, p1x procharger + stg2 intercooler. 2018 Colorado zr2 - zr2 sport bar, showcase spare tire. 2018 Camaro SS 1LE - GM cai, black bowties, suede knee bolsters, 1le plate frame, black fuel door, dark tails + 3rd brake light, euro side markers + led's, GM all weather floor mats, velossatech big mouth, GM strut brace. 2017 Corvette Grandsport (sold) - untouched. 2006 GTO (sold) - iat relocation, air box mod, monero side marker lights. Last edited by RobbyBeefcake87; 06-10-2020 at 04:05 PM.

06-10-2020, 03:12 PM	#2
DorkMissile Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018 Location: Twin Cities, MN Posts: 612	The video with the intercooler built in was more impressive __________________ 2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes

06-10-2020, 04:00 PM	#4
6spdhyperblue Drives: 6th gen Join Date: Aug 2013 Location: US Posts: 3,675	Nice ! __________________ ‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122 ‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold)

06-10-2020, 03:15 PM	#3
shootnjunky Drives: SS 1LE Join Date: Jun 2020 Location: Ohio Posts: 10	they stated in their comments below that they currently have a prototype one on their 6th gen, so it appears it will work

06-12-2020, 03:49 PM	#7
squish72 Drives: 2016 2SS 8AT Join Date: May 2018 Location: Nevada Posts: 358	I would have liked a hair longer runners for my car but it sure looks good.

06-12-2020, 03:56 PM	#8
Bohanan23 Drives: 2016 Camaro 2SS A8 Join Date: Dec 2019 Location: Moore, OK Posts: 113 View My Garage	problem is, sufficient runner length are similar to the high ram.. which require hood cut. MSD is a good contender but high ram out runs it up top. simply no way around it for sufficient runner length. But I am curious to see what TSP has in the works for another intake

06-12-2020, 04:38 PM	#10
Bohanan23 Drives: 2016 Camaro 2SS A8 Join Date: Dec 2019 Location: Moore, OK Posts: 113 View My Garage	I've seen a couple guys use stock tube and roto box with high ram. Im currently using stock tube and roto box with stock mani

07-12-2020, 11:16 PM	#12
BigGuy81 Account Suspended Drives: Man Join Date: May 2016 Location: https://t.me/pump_upp Posts: 143	Now this is definitely something to keep an eye on.

07-15-2020, 11:29 PM	#13
cmitchell17 Drives: 17 2SS, 8L90, Cam, Heads, E85 Join Date: Dec 2016 Location: US Posts: 1,201	So people are thinking that we can hook this texas speed manifold up to the stock airintake or a rotofab intake and it clear the stock hood? I thought we were basically screwed on an intake unless you go to an taller hood? or is that more a C7 problem?

User Name		Remember Me?
Password