18x11 factory reproductions what offset to pick - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

davidscamaro · 10-13-2016, 11:27 AM

I'm looking in getting a set of 18x11 zl1 FR rims ,and 18x8 for the front to run a 235.55.r18 and 305 45 r18 on the back

What offsets should I pick for the two different front and back sizes

davidscamaro · 10-13-2016, 11:58 AM

Ok I figured out for myself that the rears need to be +43 offset , but the fronts there's two choices a +19 and +27 for the 18x8 .what would you guys pick +19 or +27 for front 8" wide??

Blakester · 10-25-2016, 09:55 PM

I emailed fr when i was considering those wheels. I am pretty sure Their reply was the +19 offset for brembo brakes. i cant find the email to be positive. And you need to cut the rollerskates off the front pads if your car has them.

wrtowman · 10-25-2016, 10:00 PM

Do not order from the site. PM Doug from FR. It will be much cheaper. He will also make sure you get the correct offset.

10-13-2016, 11:27 AM	#1
davidscamaro Drives: 2010 SS/RS M6 BIG cam Join Date: Mar 2016 Location: McDonald's DT Posts: 857	18x11 factory reproductions what offset to pick I'm looking in getting a set of 18x11 zl1 FR rims ,and 18x8 for the front to run a 235.55.r18 and 305 45 r18 on the back What offsets should I pick for the two different front and back sizes __________________ BIG cam ...... 305 45 18 Mickys ...... BMR suspensions

10-13-2016, 11:58 AM	#2
davidscamaro Drives: 2010 SS/RS M6 BIG cam Join Date: Mar 2016 Location: McDonald's DT Posts: 857	Ok I figured out for myself that the rears need to be +43 offset , but the fronts there's two choices a +19 and +27 for the 18x8 .what would you guys pick +19 or +27 for front 8" wide?? __________________ BIG cam ...... 305 45 18 Mickys ...... BMR suspensions

10-25-2016, 10:00 PM	#4
wrtowman Drives: 2011 Camaro 1SS Join Date: Feb 2016 Location: Warner Robins Ga Posts: 778	Do not order from the site. PM Doug from FR. It will be much cheaper. He will also make sure you get the correct offset. __________________ 2011 SGM Camaro 1SS/RS A6 - Vengeance Racing built/tuned. 590RWHP/560RWTQ, ADM LSA Conversion, 2.5 Grip-Tec, ZL1 fuel pump, ADM FPCM, FIC1000, VRPD2 Cam and LS3 Conversion with all the internal goodies, American Racing 1 7/8 Headers, no cats, SW Retro Cat Back, ADM Intake, AFCO HX, Varimax Pump, Rotofab Reservoir, B&M Transmission Cooler, VMAX TB, Elite Engineering CC, BMR LCAs, Trailing Arms, Toe Rods, DSS 1000hp axles, ZL1 Bumper and Sideskirts, Night Owl Halos, Matte Black 20" Rohana RC-22 with 20x10-275s/20x11-315s, R1 Concept Premier Drilled/Slotted Rotors, Hawk Ceramic Pads.

10-25-2016, 09:55 PM	#3
Blakester Drives: 2010 1ss Join Date: Mar 2016 Location: Colorado Springs co Posts: 174	I emailed fr when i was considering those wheels. I am pretty sure Their reply was the +19 offset for brembo brakes. i cant find the email to be positive. And you need to cut the rollerskates off the front pads if your car has them.