01-14-2021, 01:45 PM | #1 |
Drives: 17 2SS 6sp Join Date: Jun 2020
Location: Bad Roads, North Jersey
Posts: 185
|
Coupler for rotofab/95mm tb?
I searched but couldn't find anything. Anyone have a part number for a Cupler that will join my Rotofab to a Lt5 95 mm throttlebody? I called Roto fab and they only carry a coupler for a 103 (and for $30 lol)
|
01-14-2021, 02:33 PM | #2 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
The 87mm Rotofab coupler will easily stretch over the 95mm TB. I can post a pic of mine when I get home this evening
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
01-14-2021, 02:36 PM | #3 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
Of course mine's the Magnuson supercharger version, there may be a difference vs the NA version
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
01-14-2021, 03:41 PM | #4 |
Drives: 17 2SS 6sp Join Date: Jun 2020
Location: Bad Roads, North Jersey
Posts: 185
|
Thanks for your input. If you don't mind measuring the outside of the inlet side of your s/c I'd really appreciate it. I have a hard time believing the coupler from my rotofab would stretch that much...
|
01-14-2021, 03:57 PM | #5 |
Drives: 2017 Camaro SS 1LE Join Date: Sep 2018
Location: Jacksonville, FL
Posts: 16
|
My roto-fab worked with my 95mm LT5 throttle body. The coupler steps down with the stock TB but stretched fairly easily to fit the 95mm. This is with the standard LT1 setup (although mine was on an LT2 intake manifold)
|
01-14-2021, 06:32 PM | #6 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,395
|
there is no coupler because the rotofab fits over the LT5 tb just fine.
__________________
2016+ camaro: everyone’s first car
|
01-14-2021, 08:35 PM | #7 |
Drives: 2016 Camaro 2SS Join Date: Apr 2018
Location: Central Texas
Posts: 1,011
|
Mine fit over my 95 and now is on my 103 so whatever the size for the one that comes with the intake will work.
|
01-14-2021, 10:06 PM | #8 |
Drives: 2017 Camaro 2SS Join Date: Mar 2019
Location: Lakeland, Florida
Posts: 416
|
Tube Lube will help if you have trouble stretching it. Mine fit fine on an LT5 TB...
__________________
Gary
2017 2SS A8 White, Bolt-Ons, Prayed Upon |
01-15-2021, 11:06 AM | #9 |
Drives: 17 2SS 6sp Join Date: Jun 2020
Location: Bad Roads, North Jersey
Posts: 185
|
Thanks for all the replies. I didn't realize that coupler would be able to stretch that much.
|
|
|
Post Reply
|
Thread Tools | |
|
|