08-30-2022, 11:30 AM | #1 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
2013/2014 ZL1 Roller For Sale
selling one of my ZL1's car was a thefrt recovery from cali car was put back to 100% stock to get recerted as a rebuilt title me and the car has gone through all the hoops to get the car good to go
car had 9800 miles when i got it about 13k now was no body damage as it was a theft i replaced motor and trans for a borrowed buddies setup all other parts that were missing were replaced with new down to gm bolts drove car for a summer its mint changed rear to 2014 led tails what you need motor trans drive shaft diff and axles front rotors and calipers was selling some of the good parts as was gona make this a race car but its too nice to chop up looking for $18000 canadian about $13500 usd open to offers Last edited by Blownfogger540; 03-24-2023 at 11:05 AM. |
03-08-2023, 10:44 PM | #2 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
TTT !
|
03-09-2023, 02:39 PM | #3 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,298
|
If you pulled the diff and axles how would someone transport it? I think that way would be a tough sell. Would be for me anyway.
|
03-10-2023, 04:34 PM | #4 |
Drives: 2010 Camaro 1SS Join Date: Nov 2015
Location: CA
Posts: 358
|
If you end up parting this out I'd be more than interested on buying the front facia from you.
__________________
|
03-10-2023, 05:09 PM | #5 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
|
03-10-2023, 05:14 PM | #6 |
Drives: 69 Camaro Pace Car Join Date: Oct 2009
Location: Kansas City, MO
Posts: 113
|
Is the car auto or stick?
Are the pics how it sit's now (i.e. front brakes showing in the pics)? Is all of the interior intact? |
03-10-2023, 05:21 PM | #7 | |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
Quote:
car is all there minus parts listed everything is ready to bolt in ecm bcm have all been programmed its as simple as bolting parts on it the pics are when the car was together when i ran for the summer |
|
03-15-2023, 01:29 PM | #8 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
some one must want a nice low mile car to make a screemer out of
|
03-15-2023, 03:54 PM | #9 |
Big Crow
Drives: '13 ZL1 Join Date: Mar 2017
Location: California
Posts: 1,487
|
It is beautiful. I have imagined a different build, get a SS parts car and swap over L99 and parts. It would give you a great low mi body and interior with good looks and low buy in price.
I can't do that work now myself or I'd be in for it for sure. |
03-28-2023, 02:27 PM | #10 |
Drives: 2013 ZL1 416 Join Date: Feb 2013
Location: Langley B.C
Posts: 2,619
|
yup or a 632 lol its a open project
|
|
|
|
|