01-01-2019, 06:21 PM | #1 |
Drives: 2017 fifty camaro Join Date: May 2017
Location: Frisco
Posts: 247
|
19x12 and 19x13
Anybody tried and using 19x12 front and 19x13 rear wheels?
|
01-01-2019, 06:35 PM | #2 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
I think that is why you got these ugly Wide body kits floating around....
__________________
|
01-01-2019, 06:38 PM | #3 |
Drives: 2017 fifty camaro Join Date: May 2017
Location: Frisco
Posts: 247
|
It’s only one inch bigger than stock
|
01-01-2019, 10:38 PM | #4 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
1 inch wider on wheels that already poke past the fenders.
__________________
|
01-03-2019, 10:19 AM | #5 |
Drives: 2017 Camaro 1LE Join Date: May 2016
Location: La Palma, California
Posts: 95
|
I don't even think its possible to run a 19x12 up front the largest that I've seen available is 19x11 front and 19x12 from Apex wheels https://support.apexraceparts.com/hc...-Fitment-Guide
To even be remotely possible your going to need a ZL1 1LE or a ZL1 with coil overs that have a lot of room
__________________
2017 Camaro SS 1LE
Instagram: @Destroyer_1LE Sponsor: Tires: Michelin, Wrap: Protective Film Solutions, Wheels: APEX RACE PARTS |
01-03-2019, 09:58 PM | #6 |
Drives: 2017 fifty camaro Join Date: May 2017
Location: Frisco
Posts: 247
|
I have a zl1 1le
|
01-03-2019, 10:42 PM | #7 |
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,771
|
They will stick out solid 1.5" There is no room to go inboard w/o coilover top hats to move upper mount inwards. Even then, gain what... 6-10mm?
__________________
ing for grip.
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
01-04-2019, 11:10 AM | #8 |
Drives: 2017 Camaro 1LE Join Date: May 2016
Location: La Palma, California
Posts: 95
|
Since you do have a ZL1 1LE you maybe able to make it work, however what size tire are you trying to put on the front. 315? 325? Because you can put those tires on 11" wheel without a problem, however you should be careful with it rubbing.
__________________
2017 Camaro SS 1LE
Instagram: @Destroyer_1LE Sponsor: Tires: Michelin, Wrap: Protective Film Solutions, Wheels: APEX RACE PARTS |
01-04-2019, 06:18 PM | #9 |
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
We have a dealer that did 18x12 front and back but is strictly a track set up, camber adjustments where done at about 3.7-4.2 and is running 315/30/18 front and back. no rear mods
since the only et i had was a 50et he needed to use a 2" front spacer If anyone is ever in need of such a set up I can pass down his info/ he said he would be more then happy to share what was done on the car etc/ again was a track set up not a daily. |
10-28-2023, 11:30 AM | #10 |
Drives: Camaro 1LE Join Date: Dec 2014
Location: Miami
Posts: 119
|
Anyone know what wheels those are?
|
10-28-2023, 11:36 AM | #11 |
Drives: 2018 Camaro 1SS 1LE Join Date: Sep 2018
Location: Front Range, CO
Posts: 1,868
|
I fit 18x12 square on my car, the front is very tight but it works without rubbing, there's definitely poke. I don't run this setup on the road.
__________________
|
|
|
Post Reply
|
|
|