05-26-2020, 01:51 PM | #1 |
Drives: 2017 Camaro Join Date: Feb 2020
Location: TEXAS!!
Posts: 349
|
front lights...
Hello all.
I have a question about the following lights. https://www.carid.com/2017-chevy-cam...l#installation Now. I spoke to the reps at carid. They stated it fits all camaro models 2016-2018...i think 18. The lights we have do not come with the white drl light...the one that looks like an eye on the bottom of the headlight...day time running. Will I be able to put these on? thx
__________________
|
05-26-2020, 02:05 PM | #2 |
That installation video made me cringe when they cut open the headlight like that! And then they just glue it back on? Good luck with leaks.
|
|
05-26-2020, 02:11 PM | #3 |
Drives: 2021 300 Join Date: Jan 2015
Location: New Jersey
Posts: 968
|
Maybe good for a show car but as stated above once you cut that housing apart moisture will find it way in......We all remember foggy headlights!!!
|
05-26-2020, 02:25 PM | #4 | |
Quote:
|
||
05-26-2020, 02:48 PM | #5 |
Drives: 2016 SS Join Date: Oct 2019
Location: Jamestown NC
Posts: 450
|
I agree. It's unlikely a car without the DRL's will work. Still...I suppose it's possible the wiring is there. Don't know for sure.
But I also agree with potential leaks. |
05-26-2020, 03:39 PM | #6 |
Drives: 2017 Camaro Join Date: Feb 2020
Location: TEXAS!!
Posts: 349
|
iagree thx
__________________
|
05-26-2020, 03:54 PM | #7 |
Drives: 2021 Acura RDX SH-AWD Advance Join Date: Aug 2019
Location: Cleveland, Ohio
Posts: 480
|
Don't do it.
|
05-26-2020, 05:08 PM | #8 |
Long hauler
|
I actually opened one of my lights exactly like this. Had hydroplaned and one headlight had all tabs break but the glass was good. Now instead of buying a new/used headlight I got one off eBay with all tabs intact and glass broken. Cut it open with a rental saw from Home Depot and glued it back into the new fixture with some heavy duty glue. If I can find the glue I'll update but I've had no issues
__________________
|
05-26-2020, 11:44 PM | #9 |
Drives: 2017 Camaro Join Date: Feb 2020
Location: TEXAS!!
Posts: 349
|
interesting..
__________________
|
05-26-2020, 11:53 PM | #10 |
Long hauler
|
I just noticed, if your signature photo is current then you don't have the RS lights. This kit wouldn't work with your lights currently as they don't have the LED portion that it is replacing. If you were changing lights to the RS lights then you could use this kit.
If you just want some RGB without changing headlights then you can look into RGB headlight bulbs which would only change the actual headlight bulb itself. If you go down the RS headlight path like me, you'll be looking at the cost of a set of RS or SS headlights (they're the same for these models), cost of the Gen5DIY non-RS to RS headlight harness, then the cost of this RGB kit you've linked. It gets pretty expensive this way.
__________________
|
05-26-2020, 11:54 PM | #11 | |
Long hauler
|
Quote:
__________________
|
|
05-27-2020, 02:56 PM | #12 |
Drives: 2017 Camaro Join Date: Feb 2020
Location: TEXAS!!
Posts: 349
|
thank u bumble. i will leave them as is. ltr
__________________
|
|
|
Post Reply
|
|
|