12-11-2023, 08:57 PM | #1 |
Drives: Chevy Camaro SS 1LE Join Date: Jul 2023
Location: Middle TN
Posts: 4
|
SS 1LE Wing Parts
Does anyone know the latest part numbers for the SS 1LE wing and end pieces?
Since the end pieces are notorious for coming loose if not installed right, I figured it wouldn't hurt to have spares. |
12-12-2023, 06:26 AM | #2 |
Drives: 2020 Camaro SS 1LE Join Date: Apr 2022
Location: Miami
Posts: 227
|
I don't think there is much of a point with having spares for that honestly. Feel them and if it feels like there is a lot of play and you could just pull it off with little effort then push it down firmly and that should restick it on.
Worst case scenario get some 3m double sided tape, pull it off and put the new tape on the bottom and restick it down. That must be a rare instance where a dealer didn't stick it down right but it would be obvious if that were the case when you looked at it and felt it. |
|
|
Post Reply
|
|
|