You are browsing camaro6 
01-17-2019, 08:34 AM
|
#1 |
 
Drives: 2016 Garnet Red 2SS A8 Join Date: Jul 2017
Location: Bowling Green, Ky
Posts: 124
|
AEM OBDII Datastream Gauge
I added AEM’s datastream gauge, along with the wide band, to monitor the car now that the P1X install is complete and tuned. What are the most critical channels to monitor other than AFR? And is there a good resource to see what typical values such as fuel pressure should be?
__________________
2016 Camaro 2SS - Auto - MRR 017 - Garnet Red
P1X w/ Stage II IC, LT4 Fuel System, JMS Voltage Booster, MMS Catch Can, JRE Off Road Pipes, JRE Tune |
|
|
|
01-17-2019, 09:03 AM
|
#2 |
          
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
hi and low fuel pressure along with injector pulse widths.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
