For those that want a performance panel air filter... - Page 2

IneedAZ · 01-26-2018, 11:49 AM

Quote:

Originally Posted by SLO

Just installed my green filter, OEM had seen better days, found leaves and other crud in the airbox so took a vacuum to it.

I don't have the best tools but damn one of the screws almost got stripped trying to remove it. When I goto clean the filter, I'm hoping to have hex or allen type replacements.

Good idea. PIA getting the one screw that was by itself in an angle

Canadian ZL1 · 01-26-2018, 01:41 PM

Quote:

Originally Posted by Stephen12ZL1

I didn't want to spend ridiculous $ for a Rotofab unit and went for the $55 solution which is a Green Filter in the pic. Perfect fit and it is the part # for a 2016 SS.

Here's a comparison between the Green Filter and K&N. Green is the way to go. I just order mine from Summit.
http://www.corvetteactioncenter.com/...ilter-285.html

kwav8r · 01-26-2018, 02:16 PM

Quote:

Originally Posted by S.T.A.R.

-Question, does this particular filter uses cotton as its filter media?
-If so, isn't that a bad option for a daily/semi daily ride? As it will allow to much dirt to pass by.
-Is this more appropriate for a purely racing application?

Tony

Actually, the oiled filters stop more debris (micron sized) than the paper.

In the past, K&N marketed these things as a way to increase fuel economy. While that argument helped what really sold their "filter charger kits" was the increased throttle response and 'throatier' sound when you jumped on the go pedal.

kwav8r · 01-26-2018, 02:39 PM

Quote:

Originally Posted by Canadian ZL1

Here's a comparison between the Green Filter and K&N. Green is the way to go. I just order mine from Summit.
http://www.corvetteactioncenter.com/...ilter-285.html

The link you posted is busted.

Here it is though,
http://www.corvetteactioncenter.com/...ilter-285.html

Canadian ZL1 · 01-26-2018, 03:44 PM

Quote:

Originally Posted by kwav8r

The link you posted is busted.

Here it is though,
http://www.corvetteactioncenter.com/...ilter-285.html

That's odd

Appreciate you correcting it and actually you provided me the correct url on another thread so kudos to you as I ordered the 'Green' filter for my Z

Thank you Sir

kwav8r · 01-26-2018, 03:49 PM

Quote:

Originally Posted by Canadian ZL1

That's odd

Appreciate you correcting it and actually you provided me the correct url on another thread so kudos to you as I ordered the 'Green' filter for my Z

Thank you Sir

S.T.A.R. · 01-26-2018, 06:56 PM

Quote:

Originally Posted by kwav8r

Actually, the oiled filters stop more debris (micron sized) than the paper.

In the past, K&N marketed these things as a way to increase fuel economy. While that argument helped what really sold their "filter charger kits" was the increased throttle response and 'throatier' sound when you jumped on the go pedal.

Thanks kwav8r, I'm feeling around for feedback before I buy.

Stephen12ZL1 · 01-26-2018, 08:28 PM

Green filter has performed well on track for 1000+ miles. No downsides or issues!

waterman · 01-26-2018, 08:37 PM

Quote:

Originally Posted by kwav8r

The link you posted is busted.

Here it is though,
http://www.corvetteactioncenter.com/...ilter-285.html

Thanks for posting. Good info.

91454 · 01-28-2018, 07:48 PM

After reading ur post the other day, I ordered one of these from Summit this evening. Thanks.

nicktechla · 01-28-2018, 08:14 PM

Quote:

Originally Posted by SLO

Just installed my green filter, OEM had seen better days, found leaves and other crud in the airbox so took a vacuum to it.

I don't have the best tools but damn one of the screws almost got stripped trying to remove it. When I goto clean the filter, I'm hoping to have hex or allen type replacements.

hex would be nice. those screws are annoying. This is the first car I've ever had that required screws to change the air filter. hah

91454 · 02-01-2018, 07:44 PM

I see what you mean about that screw! I gave up. Went to Lowe's and bought a small ratchet tool. I'll try again tomorrow. To top it off, I was putting the others back and dropped one into the bowels below! Never to be seen again. Have to order new screws now! Just my luck....

kwav8r · 02-02-2018, 06:33 AM

Quote:

Originally Posted by 91454

I see what you mean about that screw! I gave up. Went to Lowe's and bought a small ratchet tool. I'll try again tomorrow. To top it off, I was putting the others back and dropped one into the bowels below! Never to be seen again. Have to order new screws now! Just my luck....

Get one of these:
https://www.amazon.com/SE-8036TM-NEW...8N9KQRSV7MF39V

It'll turn up quicker than trying to find a replacement screw.

ZL1 1LE · 02-02-2018, 10:00 AM

Quote:

Originally Posted by kwav8r

Get one of these:
https://www.amazon.com/SE-8036TM-NEW...8N9KQRSV7MF39V

It'll turn up quicker than trying to find a replacement screw.

This, saved my bacon when I dropped a bolt when installing the TM ported throttle body.

01-26-2018, 08:28 PM	#22
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,809	Green filter has performed well on track for 1000+ miles. No downsides or issues! __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

01-28-2018, 07:48 PM	#24
91454 Drives: 2018 zl1 Join Date: Dec 2017 Location: South east , fl Posts: 60	After reading ur post the other day, I ordered one of these from Summit this evening. Thanks.

02-01-2018, 07:44 PM	#26
91454 Drives: 2018 zl1 Join Date: Dec 2017 Location: South east , fl Posts: 60	I see what you mean about that screw! I gave up. Went to Lowe's and bought a small ratchet tool. I'll try again tomorrow. To top it off, I was putting the others back and dropped one into the bowels below! Never to be seen again. Have to order new screws now! Just my luck....

User Name		Remember Me?
Password