LT1 Chevy Intake Now Available!

Knein · 07-30-2016, 04:22 PM

http://www.chevrolet.com/ownership/a...tnt=185022:1:0

This says it's only available for the LT and says nothing about a tune.

It's available now though it seems.

Performance Air Intake

Part Name: Performance Air Intake. For use with LT models
Part #: 84099781
Brand: Chevrolet OEM

trialskid · 07-30-2016, 05:44 PM

The v8 part number is 84073382

MiamiBlueCamaro · 07-30-2016, 06:12 PM

picture here

D2enigma · 07-30-2016, 10:20 PM

Part number for v8 is not found. i dont see anything on whether this is legal in california. Is this a certified part?

Sent from my iPad using Tapatalk

BlackbeastSS2 · 07-30-2016, 10:26 PM

Big Air Cone in stock intake box.
I decided to try a big cone air filter in my stock air box. I orginal tried an open big cone but was worried about the heat and dynamics of air flow. Plus, I don't want to spend $450 on an intake system that may or may not increase any performance. I truly wish I had easy access to a Dyno so I could prove a performance increase or not. I also understand that by changing the air flow to the Mass Air Flow which in turn may cause the ecu to read a false reading. Thus a tune is needed in my opinion even with an after market air intake system or my own self mod.

So, I decided to stay as stock as I can with exception of adding a big cone air filter and a small mod to the stock air box. In order to fit the new air filter in I had to cut about a six by six hole in the bottom of the stock air box. I then sealed the hole with aircraft duct tape . The filter fits in the stock box and I am able to close the box with a tight seal screwed down tight. I have had it in for a week now, no issues. Performance wise, not sure. (No Dyno) Seems fine with no lose of power in my opinion, but engine sounds louder when you step on the gas. When the OEM factory air box's comes out I may just get the air box parts if I am able to do that for the correct seal. I would rather self MOD then dish out hundreds of dollars.

TheBigO · 07-30-2016, 10:30 PM

It isn't on the Chevy website yet. It is listed here though http://www.gmpartsdirect.com/oe-gm/84073382

D2enigma · 07-30-2016, 10:59 PM

That link is for cleaning kit..

Sent from my iPad using Tapatalk

trialskid · 07-30-2016, 11:00 PM

No that's the intake

Sent from my iPhone using Tapatalk

D2enigma · 07-30-2016, 11:03 PM

Is this CARB certified? Someone told me that if its direct from GM, it would be, but i dont see that written anywhere.

Sent from my iPad using Tapatalk

D2enigma · 07-30-2016, 11:10 PM

Link has no picture and it says it is a cleaning kit. It must be a hell of a cleaning kit with that price tag.. Lol

Sent from my iPad using Tapatalk

trialskid · 07-30-2016, 11:11 PM

Intakes are sometimes called air cleaners

Sent from my iPhone using Tapatalk

TheBigO · 07-30-2016, 11:16 PM

Quote:

Originally Posted by D2enigma

Link has no picture and it says it is a cleaning kit. It must be a hell of a cleaning kit with that price tag.. Lol

Sent from my iPad using Tapatalk

For reference here is the one for the V6 listed above, it is also called a cleaner kit.

http://www.gmpartsdirect.com/oe-gm/84099781

TenSeven · 07-31-2016, 02:36 AM

The GM intake is ~$430?!?!? Ouch...

If this is a GM rebrand of CAI's CAI, what kind of power improvement #'s are we looking at for well over $400? I'd hope for at least a 20hp dyno-verified increase.

Mr. Rager · 07-31-2016, 11:14 AM

Price is market competitive, it's within $30 of every other CAI on Phasetek. That doesn't mean it's a bargain either.

My only interest in it was that originally they discussed selling it with a tune update. This seems like maybe that has been shelved, but I'll be patient a bit longer and see what it actually does.

07-30-2016, 04:22 PM	#1
Knein Drives: 2016 2SS Hyper Blue M6 NPP/Mag Join Date: Nov 2010 Location: Dallas, tx Posts: 197	GM Cold Air Intake http://www.chevrolet.com/ownership/a...tnt=185022:1:0 This says it's only available for the LT and says nothing about a tune. It's available now though it seems. Performance Air Intake Part Name: Performance Air Intake. For use with LT models Part #: 84099781 Brand: Chevrolet OEM

07-30-2016, 05:44 PM	#2
trialskid Drives: 2016 Camaro SS Join Date: Jul 2016 Location: Fort McMurray Posts: 15	GM Cold Air Intake The v8 part number is 84073382

07-30-2016, 06:12 PM	#3
MiamiBlueCamaro Drives: Gen 6 Camaro RS Join Date: Dec 2015 Location: Miami FL Posts: 1,725	picture here Attached Images

07-30-2016, 10:26 PM	#5
BlackbeastSS2 Drives: 2019 Camaro 1LE Shock Candy Join Date: Mar 2016 Location: Garage Posts: 1,757	Big Air Cone in stock intake box. I decided to try a big cone air filter in my stock air box. I orginal tried an open big cone but was worried about the heat and dynamics of air flow. Plus, I don't want to spend $450 on an intake system that may or may not increase any performance. I truly wish I had easy access to a Dyno so I could prove a performance increase or not. I also understand that by changing the air flow to the Mass Air Flow which in turn may cause the ecu to read a false reading. Thus a tune is needed in my opinion even with an after market air intake system or my own self mod. So, I decided to stay as stock as I can with exception of adding a big cone air filter and a small mod to the stock air box. In order to fit the new air filter in I had to cut about a six by six hole in the bottom of the stock air box. I then sealed the hole with aircraft duct tape . The filter fits in the stock box and I am able to close the box with a tight seal screwed down tight. I have had it in for a week now, no issues. Performance wise, not sure. (No Dyno) Seems fine with no lose of power in my opinion, but engine sounds louder when you step on the gas. When the OEM factory air box's comes out I may just get the air box parts if I am able to do that for the correct seal. I would rather self MOD then dish out hundreds of dollars. __________________ LT4 1.7 Supercharger snout ported & Meth 103 Katech TB, KATECH Custom Heads, DSX In-line fuel TSP Headers, Spec P Super Twin Clutch, TSP EL C7 CAM Diamond Piston & Manley Rods, Roto Fab Big Gulp BTR Push Rods,LS7 Lifters, ARP, FI Chiller, Kirkey Seats SJM Line Lock, Hurst Pistol Grip. 747/739 RWHP street tune - 821/794 RWHP track tune 101 octane. 2014 Mini Cooper countryman S All4 M6 daily driver

07-30-2016, 10:20 PM	#4
D2enigma Drives: 2016 2SS Join Date: Feb 2013 Location: Irvine CA Posts: 201	Part number for v8 is not found. i dont see anything on whether this is legal in california. Is this a certified part? Sent from my iPad using Tapatalk

07-30-2016, 10:30 PM	#6
TheBigO Drives: 2016 Camaro 2SS Join Date: Jun 2016 Location: Las Vegas, NV Posts: 30	It isn't on the Chevy website yet. It is listed here though http://www.gmpartsdirect.com/oe-gm/84073382

07-30-2016, 10:59 PM	#7
D2enigma Drives: 2016 2SS Join Date: Feb 2013 Location: Irvine CA Posts: 201	That link is for cleaning kit.. Sent from my iPad using Tapatalk

07-30-2016, 11:00 PM	#8
trialskid Drives: 2016 Camaro SS Join Date: Jul 2016 Location: Fort McMurray Posts: 15	No that's the intake Sent from my iPhone using Tapatalk

07-30-2016, 11:03 PM	#9
D2enigma Drives: 2016 2SS Join Date: Feb 2013 Location: Irvine CA Posts: 201	Is this CARB certified? Someone told me that if its direct from GM, it would be, but i dont see that written anywhere. Sent from my iPad using Tapatalk

07-30-2016, 11:10 PM	#10
D2enigma Drives: 2016 2SS Join Date: Feb 2013 Location: Irvine CA Posts: 201	Link has no picture and it says it is a cleaning kit. It must be a hell of a cleaning kit with that price tag.. Lol Sent from my iPad using Tapatalk

07-30-2016, 11:11 PM	#11
trialskid Drives: 2016 Camaro SS Join Date: Jul 2016 Location: Fort McMurray Posts: 15	Intakes are sometimes called air cleaners Sent from my iPhone using Tapatalk

07-31-2016, 02:36 AM	#13
TenSeven Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Huntington Beach, CA Posts: 299 View My Garage	The GM intake is ~$430?!?!? Ouch... If this is a GM rebrand of CAI's CAI, what kind of power improvement #'s are we looking at for well over $400? I'd hope for at least a 20hp dyno-verified increase.

07-31-2016, 11:14 AM	#14
Mr. Rager Drives: 2017 2SS MRC NPP Join Date: Jul 2016 Location: Illinois Posts: 63	Price is market competitive, it's within $30 of every other CAI on Phasetek. That doesn't mean it's a bargain either. My only interest in it was that originally they discussed selling it with a tune update. This seems like maybe that has been shelved, but I'll be patient a bit longer and see what it actually does.

User Name		Remember Me?
Password