![]() |
#29 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,660
|
What size is the drag tire
__________________
22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28 dragpack - 11.68@122
16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
![]() |
![]() |
![]() |
#30 |
![]() Drives: 2022 Camaro 1ss 1le Join Date: Jan 2022
Location: LA
Posts: 51
|
Mt 305-45-17. I used to have to turn off traction control because it lit up my dash. Recently even before taking it to get the cam and work done i didn’t have to turn it off since the light never came on. But I did take some air out the fronts
|
![]() |
![]() |
![]() |
#31 |
![]() ![]() Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 911
|
That size drag tire is the same dia as OEM. Sounds to me like it isnt a tune or tire issue. It was likely coincidence that it seemed to happen or get worse by switching. From your description it is (or was) getting worse regardless of what you did.
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) |
![]() |
![]() |
![]() |
#32 |
![]() Drives: 2022 Camaro 1ss 1le Join Date: Jan 2022
Location: LA
Posts: 51
|
So what you think it might be then ? I mean it’s a day and night difference. I would’ve felt or noticed if it began doing that way before.
|
![]() |
![]() |
![]() |
#33 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,660
|
Quote:
OP i bet youre changing just the rear wheels? It’s stability and traction control. It takes a bit of driving for it to settle and bc you switch back and forth the computers somewhere in the middle. some say it’s dangerous. You should swap to 28” fronts to match the rear to avoid all this.
__________________
22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28 dragpack - 11.68@122
16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
|
![]() |
![]() |
![]() |
#34 |
![]() Drives: 2022 Camaro 1ss 1le Join Date: Jan 2022
Location: LA
Posts: 51
|
I’ll swap my stocks and inflate them to 35psi and I’ll update you guys
|
![]() |
![]() |
![]() |
#35 |
![]() Drives: 2022 Camaro 1ss 1le Join Date: Jan 2022
Location: LA
Posts: 51
|
Wouldn’t it give me a light on my dash if it was stability and traction control?
|
![]() |
![]() |
![]() |
#36 |
![]() ![]() Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 911
|
Ive not seen stability and TC cause the throttle to open more, only close it for torque mgmt. I highly doubt its ESC or TC. But I've been wrong before.
My money is on a wiring issue thats been progressively getting worse. Ive experienced the issues with torque mgmt due to wrong tire sizes first hand. It was nothing like what OP is describing. ![]()
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) Last edited by cjperformance; 11-20-2023 at 08:21 AM. |
![]() |
![]() |
![]() |
#37 |
![]() Drives: 2022 Camaro 1ss 1le Join Date: Jan 2022
Location: LA
Posts: 51
|
I seen this thread kinda the same as my experience but idk https://www.camaro6.com/forums/showt...oogle_vignette
|
![]() |
![]() |
![]() |
#38 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,660
|
I missed the part about the throttle opening. Probably not then
__________________
22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28 dragpack - 11.68@122
16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
![]() |
![]() |
![]() |
#39 |
![]() Drives: 2022 Camaro 1ss 1le Join Date: Jan 2022
Location: LA
Posts: 51
|
So good news. I put my stocks rims put 35psi on all four flashed my old tune I had before the cam and it ran good besides the stalling and stuff no more surges on the tb
|
![]() |
![]() |
![]() |
#40 |
![]() Drives: 2022 Camaro 1ss 1le Join Date: Jan 2022
Location: LA
Posts: 51
|
Flashed my cam startup tune and it started doing it again, so I reflashed old fbo tune and problem gone again
Last edited by Jonathan91; 11-21-2023 at 12:13 AM. |
![]() |
![]() |
![]() |
#41 |
![]() ![]() Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 911
|
Someone has responded to your thread on the HPT site. That person seems to know their stuff. I'd dig a little deeper with them. They seem to think the problem is in the tune. From your last couple of posts here, it does seem likely its the tune and not tires or wiring like i originally thought.
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) |
![]() |
![]() |
![]() |
#42 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,660
|
While I disagree with GPIs overall approach on tuning, their sheer volume of tunes would make me think they’d know if what they did would cause these issues.
__________________
22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28 dragpack - 11.68@122
16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
![]() |
![]() |
|
|
Post Reply
|
Thread Tools | |
|
|