[CC2018SS1LE]

Originally Posted by JamesNoBrakes

The other thing I've noticed: I've since gone with 10mm wider tires than stock up front, seemed to make a noticeable difference in over/understeer, people watching from the sidelines told me "I've never seen a Camaro over-steer before!". They are likely not knowledgeable on the 1LE, but it was fun to hear.

I agree, oversteer is not uncommon on a 1LE
If you are in full track mode, it is very easy to step the rear out on a 1LE
It has a lot of TQ, it a no brainer

[carguy55]

Maybe just me but I've never had a problem with the stock 1LE oversteering on a dry track. In fact it understeers a little. I'm now using a square 305 setup and its absolutely perfect.

[CC2018SS1LE]

Originally Posted by carguy55

Maybe just me but I've never had a problem with the stock 1LE oversteering on a dry track. In fact it understeers a little. I'm now using a square 305 setup and its absolutely perfect.

If you give it enough gas coming of a turn, the ass will definitely skip out

[pbsinternet1le]

305 30 19 square...more gas and understeer is gone.

[carguy55]

Originally Posted by pbsinternet1le

305 30 19 square...more gas and understeer is gone.

You nailed it!

[CC2018SS1LE]

Originally Posted by carguy55

Maybe just me but I've never had a problem with the stock 1LE oversteering on a dry track. In fact it understeers a little. I'm now using a square 305 setup and its absolutely perfect.

What wheels do you use, did you have to do any mods to rum 305s in front
Thx

[carguy55]

Originally Posted by CC2018SS1LE

What wheels do you use, did you have to do any mods to rum 305s in front
Thx

My true square setup is Apex Arc 8 19x10.5 ET22 which requires a strut mod with 5mm spacer and longer studs in front or camber plates.

https://www.camaro6.com/forums/showthread.php?t=529442

Strut mod:
https://www.camaro6.com/forums/showthread.php?t=526353

[That1guy_tim]

Originally Posted by carguy55

My true square setup is Apex Arc 8 19x10.5 ET22 which requires a strut mod with 5mm spacer and longer studs in front or camber plates.

https://www.camaro6.com/forums/showthread.php?t=529442

Strut mod:
https://www.camaro6.com/forums/showthread.php?t=526353

I too run this exact setup with the strut mod and it works perfectly.

[CC2018SS1LE]

Originally Posted by carguy55

My true square setup is Apex Arc 8 19x10.5 ET22 which requires a strut mod with 5mm spacer and longer studs in front or camber plates.

https://www.camaro6.com/forums/showthread.php?t=529442

Strut mod:
https://www.camaro6.com/forums/showthread.php?t=526353

Thanks for info
Nice set up