Installed some Carbon to the interior !

DemonZL1 · 09-13-2020, 12:48 PM

Just got done installing some carbon pieces in the interior. Love the way it came out. Need the radio bezel and some other pieces when they become available.

gtfoxy · 09-13-2020, 04:35 PM

Noice!

I would’t mind a few pieces to go with the dash piece.

Maybe I missed it, but where did you source them from?

DemonZL1 · 09-13-2020, 04:58 PM

Quote:

Originally Posted by gtfoxy

Noice!

I would’t mind a few pieces to go with the dash piece.

Maybe I missed it, but where did you source them from?

I didn't mention it because of my deep love for Anderson Composites.

A buddy of mine found these at carbon addons.

The dash piece I got from my dealer.

gtfoxy · 09-13-2020, 05:42 PM

Quote:

Originally Posted by CarbonZLE

I didn't mention it because of my deep love for Anderson Composites.

A buddy of mine found these at carbon addons.

The dash piece I got from my dealer.

Main came with factory installed dash panel, but thanks!

Orange ss · 09-14-2020, 02:06 PM

Quote:

Originally Posted by CarbonZLE

Just got done installing some carbon pieces in the interior. Love the way it came out. Need the radio bezel and some other pieces when they become available.

nice !! Did use 3m adhesive promoter for the parts

DemonZL1 · 09-14-2020, 02:36 PM

Quote:

Originally Posted by Orange ss

nice !! Did use 3m adhesive promoter for the parts

I did not. Just alcohol to clean then dry and set.

Will see how they hold up over time and if the promoter will be needed if I have to replace any pieces.

silverscreamo · 09-18-2020, 02:29 PM

Genuinely looks awesome! I've been a bit on the fence about carbon pieces, mostly because the best I've come across so far are some cheap amazon bits. Your look is much cleaner!

DemonZL1 · 09-19-2020, 08:42 AM

Quote:

Originally Posted by silverscreamo

Genuinely looks awesome! I've been a bit on the fence about carbon pieces, mostly because the best I've come across so far are some cheap amazon bits. Your look is much cleaner!

Thank you !

I really like these pieces, they look just as good in person.

DATSSDO · 09-21-2020, 07:15 PM

lots of glossy carbon fiber. matches perfect with exterior color too

EDFHOBBIES · 09-24-2020, 03:48 PM

which are real carbon which are hydro dipped? looking at some of the pics on the website i see hydro dipped yet it says carbon.

Billabongi · 10-06-2020, 10:27 PM

Quote:

Originally Posted by EDFHOBBIES

which are real carbon which are hydro dipped? looking at some of the pics on the website i see hydro dipped yet it says carbon.

So far everything I’ve bought has been real carbon. I was skeptical too but bought a few pieces and was really impressed.

EDFHOBBIES · 10-07-2020, 11:26 AM

Thank you I need a the area by the drink holders, arm rest and outside the shifter bezel.

sspddmn · 10-14-2020, 04:53 PM

OP, for the antenna piece , were there gaps at the bottom of the antenna piece where you can see the color of the car? I watched lethal garages video and his parts were from Wildhammer and his left significant gaps on the antenna piece and the door handle pieces. Thanks.

JT Camaro · 11-15-2020, 01:34 PM

looking forward to the center screen carbon

09-24-2020, 03:48 PM	#10
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	which are real carbon which are hydro dipped? looking at some of the pics on the website i see hydro dipped yet it says carbon. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-07-2020, 11:26 AM	#12
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Thank you I need a the area by the drink holders, arm rest and outside the shifter bezel. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-14-2020, 04:53 PM	#13
sspddmn Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009 Location: SF Bay but from the 808 Posts: 1,078	OP, for the antenna piece , were there gaps at the bottom of the antenna piece where you can see the color of the car? I watched lethal garages video and his parts were from Wildhammer and his left significant gaps on the antenna piece and the door handle pieces. Thanks. __________________ In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)

09-13-2020, 04:35 PM	#2
gtfoxy Account Suspended Drives: '21 Wild Cherry ZL1 Join Date: Aug 2018 Location: WI Posts: 2,082	Noice! I would’t mind a few pieces to go with the dash piece. Maybe I missed it, but where did you source them from?

09-18-2020, 02:29 PM	#7
silverscreamo Drives: Chevrolet Camaro V6 with RS package Join Date: Sep 2020 Location: Floriduh Posts: 53 View My Garage	Genuinely looks awesome! I've been a bit on the fence about carbon pieces, mostly because the best I've come across so far are some cheap amazon bits. Your look is much cleaner!

09-21-2020, 07:15 PM	#9
DATSSDO Drives: 2020 Camaro SS 1LE Join Date: Aug 2020 Location: Bay Area, CA Posts: 30	lots of glossy carbon fiber. matches perfect with exterior color too

11-15-2020, 01:34 PM	#14
JT Camaro Drives: 2018 ZLE Join Date: Jul 2014 Location: Ontario, Canada Posts: 580	looking forward to the center screen carbon

User Name		Remember Me?
Password