1LE spoiler for 2016 SS

Steve 2016 SS · 08-27-2018, 03:38 PM

Hey everyone, does anyone know what the part number would be for a !LE spoiler from the 2017 that would be a direct bolt on my 2016 SS 2SS?

carguy55 · 08-27-2018, 04:19 PM

The 1LE spoiler doesn't bolt up to the SS trunk lid, they use different hole pattern. There are guys with 1LEs looking to swap trunk lids to get a SS lid, but that has other issues like having the lid painted.

Aragorn · 08-27-2018, 04:23 PM

Good question. Love the 1le spoiler.

Joey Soul · 08-28-2018, 07:18 AM

The ikon 1le rep wing sticks on and covers the oem holes

JFM-jr · 08-28-2018, 11:24 AM

Anybody near NY that wants to swap out a Hyper Blue 1LE lid for an SS lid I'm game

Steve 2016 SS · 08-28-2018, 12:18 PM

Quote:

Originally Posted by Joey Soul

The ikon 1le rep wing sticks on and covers the oem holes

Are you saying the 17 1LE spoiler will cover the holes on my SS?

Bad Anvil Garage · 08-28-2018, 12:44 PM

Quote:

Originally Posted by Steve 2016 SS

Are you saying the 17 1LE spoiler will cover the holes on my SS?

Will NOT.

Tyl3r · 08-28-2018, 01:26 PM

Mosaic black spoiler-less lid w/ 3K miles looking to trade for spoiler lid. Long island, NY here.

m4nat · 08-30-2018, 01:12 PM

You don't need to swap trunks. Purchase the IKON Motorsports 3 piece blade spoiler, it *does* cover all the hole that the SS spoiler makes on our trunks, trust me I did it. Check my instagram for pictures: @MANAT.0

Here's the link:
https://www.ikonmotorsports.com/16-1...k-spoiler.html

I would also suggest purchasing two rolls of 3M VHB double sided tape to keep it on the car, as the glue they provide to you to stick the spoiler on isn't that great.

I purchased a paint-matched 3 piece spoiler, and the paint is not too bad!

JFM-jr · 09-02-2018, 07:20 AM

Quote:

Originally Posted by m4nat

You don't need to swap trunks. Purchase the IKON Motorsports 3 piece blade spoiler, it *does* cover all the hole that the SS spoiler makes on our trunks, trust me I did it. Check my instagram for pictures: @MANAT.0

Here's the link:
https://www.ikonmotorsports.com/16-1...k-spoiler.html

I would also suggest purchasing two rolls of 3M VHB double sided tape to keep it on the car, as the glue they provide to you to stick the spoiler on isn't that great.

I purchased a paint-matched 3 piece spoiler, and the paint is not too bad!

This was my original plan until i started seeing guys having issues with the blade seperating from the trunk lid. This IKON spoiler attaches with tape only correct? Its more than one person reporting seperation issues with this spoiler

gpskinzhut · 09-02-2018, 07:46 AM

Quote:

Originally Posted by JFM-jr

This was my original plan until i started seeing guys having issues with the blade seperating from the trunk lid. This IKON spoiler attaches with tape only correct? Its more than one person reporting seperation issues with this spoiler

A few self-tapping screws take care of that.

hotlap · 09-02-2018, 08:28 AM

Quote:

Originally Posted by JFM-jr

This was my original plan until i started seeing guys having issues with the blade seperating from the trunk lid. This IKON spoiler attaches with tape only correct? Its more than one person reporting seperation issues with this spoiler

FYI - My 16 SSes factory blade spoiler had no issues after 27 months and 20k miles. I drove it daily in Wisconsin so it was subjected to -0 to 100 degrees. It’s end caps were attached only with tape.

I always bucket wash my cars and dry them with a master blaster that gets all the water out of the crevices.

hworth18 · 09-02-2018, 10:45 PM

Quote:

Originally Posted by gpskinzhut

A few self-tapping screws take care of that.

^^This^^
I installed my Ikon spoiler then ran 1 self tapping screw thru each end to make sure it doesn't come off. I used one of the factory holes on each end with a large washer.

m4nat · 09-04-2018, 06:56 PM

Quote:

Originally Posted by JFM-jr

This was my original plan until i started seeing guys having issues with the blade seperating from the trunk lid. This IKON spoiler attaches with tape only correct? Its more than one person reporting seperation issues with this spoiler

As stated above the self-tapping screws do the job perfectly! You can find them at any hardware store. I used a combination of the VHB tape and then also used the self-tapping screws as soon as it came up again.

Definitely worth it.

08-27-2018, 03:38 PM	#1
Steve 2016 SS Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Georgetown Ontario Posts: 131 View My Garage	1LE spoiler for 2016 SS Hey everyone, does anyone know what the part number would be for a !LE spoiler from the 2017 that would be a direct bolt on my 2016 SS 2SS?

08-28-2018, 11:24 AM	#5
JFM-jr Drives: 2016 Camaro 2SS Join Date: Mar 2016 Location: Suffolk Long Island Posts: 954	Anybody near NY that wants to swap out a Hyper Blue 1LE lid for an SS lid I'm game __________________ 2016 Hyper Blue 2SS A8,NPP,Moonroof Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray

08-30-2018, 01:12 PM	#9
m4nat Drives: 2016 Camaro 2SS Join Date: May 2017 Location: Northern VA Posts: 63	You don't need to swap trunks. Purchase the IKON Motorsports 3 piece blade spoiler, it does cover all the hole that the SS spoiler makes on our trunks, trust me I did it. Check my instagram for pictures: @MANAT.0 Here's the link: https://www.ikonmotorsports.com/16-1...k-spoiler.html I would also suggest purchasing two rolls of 3M VHB double sided tape to keep it on the car, as the glue they provide to you to stick the spoiler on isn't that great. I purchased a paint-matched 3 piece spoiler, and the paint is not too bad! __________________ IG: @manat.0

08-27-2018, 04:19 PM	#2
carguy55 Drives: 2018 1SS 1LE Join Date: Feb 2017 Location: Austin, Texas Posts: 1,488 View My Garage	The 1LE spoiler doesn't bolt up to the SS trunk lid, they use different hole pattern. There are guys with 1LEs looking to swap trunk lids to get a SS lid, but that has other issues like having the lid painted.

08-27-2018, 04:23 PM	#3
Aragorn Account Suspended Drives: Camaro SS 1LE Join Date: Aug 2018 Location: Phoenix Posts: 1,538	Good question. Love the 1le spoiler.

08-28-2018, 07:18 AM	#4
Joey Soul The Mechanic Drives: 1SS M Join Date: Dec 2017 Location: NJ Posts: 291	The ikon 1le rep wing sticks on and covers the oem holes

08-28-2018, 01:26 PM	#8
Tyl3r Drives: Camaro 2LT Join Date: Jun 2018 Location: Boca Raton, Fl Posts: 282	Mosaic black spoiler-less lid w/ 3K miles looking to trade for spoiler lid. Long island, NY here.

User Name		Remember Me?
Password