[Soleil]

The OEM 1LE are
Front 20x10 ET 20
Rear 20x11 ET43 if I am not mistaken. Please correct me if I’m wrong.
How do you get 295 on 10” and 335 on 11”?

[ride98red]

Originally Posted by ex-SS-ve

I dont run spacers. At all..

I'm not doubting ya man...but I can't understand how it's fitting without rub. Must be differences between the 1LE and the SS. Lethal (Mat) had issues with his 315's rubbing. Yes, his tires were R888's vice your MPSS so the MPSS's must run skinny.

At 7:20 of the below video, Mat highlights his opinion on rub and also mentions that he is running 5mm spacers with the 315's. Now, he has the MRR rep 1LE wheels but according to MRR, they are the same spec as OEM (+23et/+43et)

Nonetheless, your can looks absolutely gorgeous! Nicely done.

https://youtu.be/NQZggYFeTTM

[ex-SS-ve]

Originally Posted by Outahand

Looks great.

How do you like the tire so far compared to stock?

This should work on a ZL1 if our wheels have the same offset.

it will work on a zl1 no problem. Thanks.

Originally Posted by Soleil

The OEM 1LE are
Front 20x10 ET 20
Rear 20x11 ET43 if I am not mistaken. Please correct me if I’m wrong.
How do you get 295 on 10” and 335 on 11”?

I have never looked at the offset. So im not sure what it is. I do know they are 20x10 & 20x11. Not sure what other evidence you need me to prove that i have 335 tires on factory wheels.

Originally Posted by ride98red

I'm not doubting ya man...but I can't understand how it's fitting without rub. Must be differences between the 1LE and the SS. Lethal (Mat) had issues with his 315's rubbing. Yes, his tires were R888's vice your MPSS so the MPSS's must run skinny.

At 7:20 of the below video, Mat highlights his opinion on rub and also mentions that he is running 5mm spacers with the 315's. Now, he has the MRR rep 1LE wheels but according to MRR, they are the same spec as OEM (+23et/+43et)

Nonetheless, your can looks absolutely gorgeous! Nicely done.

https://youtu.be/NQZggYFeTTM

Thanks. But honestly i do not know who this “lethal matt” guy you speak of is ive seen many guys try to run 11s and fail terribly because offset wasnt correct. Not sure how his little 315s rubbed when they run far more narrow than a mpss with 13.5” section width. But thanks.

[RUQWIKR]

Originally Posted by Soleil

The OEM 1LE are
Front 20x10 ET 20
Rear 20x11 ET43 if I am not mistaken. Please correct me if I’m wrong.
How do you get 295 on 10” and 335 on 11”?

I have a spare set of 20" OEM SS 1LE rims with 285/305 MPSS's. I agree they are narrower than the Goodyears. I did those a year ago. If I had seen pics like these, I would have gone the same way.

[Soleil]

@ex-SS-ve,

I have never looked at the offset. So im not sure what it is. I do know they are 20x10 & 20x11. Not sure what other evidence you need me to prove that i have 335 tires on factory wheels.

You don’t have to prove anything. I was just wondering as my wheel configurator keeps telling me that 295 do not fit on 10” and 335 do not fit on 11” maybe I have to contact Michelin to get an approval. Here in the EU we have other rules and regulations.

As I said before your car looks awesome if you have some more pics
Please

[BradfordCamaro]

PSS run a rounded sidewall. So going to a 295 up front just squares it out with the wheel.

[ex-SS-ve]

Originally Posted by Soleil

@ex-SS-ve,


You don’t have to prove anything. I was just wondering as my wheel configurator keeps telling me that 295 do not fit on 10” and 335 do not fit on 11” maybe I have to contact Michelin to get an approval. Here in the EU we have other rules and regulations.

As I said before your car looks awesome if you have some more pics
Please

It wasnt meant in a bad way.
I had to do all sorts of overrides with discount tire to get these tires. They gave me a hard time after they showed up. I was like dont worry about it. The hardest part of the swap was removing the original tires. The new ones went on no problem..

[BurnOne]

Is the rear fender well any deeper on the 17 1LE compared to the 16 SS??? I like the idea of putting 335's on my 16 SS...

[Soleil]

As far as I know are the fender of all ´16 -´18 Camaro the same. From LT to ZL1. Only the front of the ZL1 is bigger.

[DenverTaco07]

lethal camaro's issue was with the wiring harness in the rear driver's side well, this harness is routed differently on the 1LE and ZL1. Not sure what wheel he was using, but not a chevy wheel...so could also play a role in his issue- he uses spacers too.

[DenverTaco07]

tire rack says section width of mp4s 305 is 12.3 inches, same as oe tire....

how they look chincy?

oh, tread width is

11.2 michelin

11.8 goodyear

[Smashn808]

Those look perfect. I’m at 6k miles and may go the same route soon.

[DFW1LE]

I can't find the Pilot 4s on tire rack in 335/30/20, where did you find that size?

[jimmypop13]

Originally Posted by DFW1LE

I can't find the Pilot 4s on tire rack in 335/30/20, where did you find that size?

He said they are pilot super sports, not ps4s.