11-06-2020, 11:05 AM | #43 |
Drives: 2018 Camaro SS 1LE Join Date: Jan 2020
Location: Illinois
Posts: 41
|
So, going to install new half shafts soon. Does anyone know what the torque spec is on the 6 T bolts, CV to Diff.? And what to torque the big 36 mm axial nut at??
|
11-06-2020, 05:24 PM | #44 |
Resident Land Surveyor
Drives: 2016 Camaro 1SS - Summit White M6 Join Date: Aug 2016
Location: Henryetta/Tulsa - Oklahoma
Posts: 588
|
The manual I linked in post #34 should give you that answer. It should actually be near the same section as the axle nuts if I remember correctly.
__________________
2016 Summit 1SS 49th Anniversary Commemorative Limited Plutonium Edition - M6, Solo Axleback & !RearCats, Ultra-Rare Cloth Seats, Forgestar CF5V 19x10-285/35 19x11-325/30
2001 NBM Trans Am WS6, Wifey's Grocery Getter - Torquer V2 cam, Racetronix Fuel Pump, Yank 3000 Stall, Transgo 1-2 kit, TSP LTs, Magnaflow, Strano Springs/Koni STR.T shocks, 17x9.5/17x11 TTIIs, Ed Wright tuned |
03-16-2021, 10:56 AM | #45 |
Drives: 2018 2SS Camaro Join Date: Jul 2019
Location: Maine
Posts: 98
|
What size Socket is needed for the...Axle Nut? I see some say 36mm...I just bought a 36mm impact socket and it doesn't fit.
Thanks in advance! .
__________________
Let the Good Times...Roll!
|
03-16-2021, 11:34 PM | #46 |
Drives: 2017 1ss 1le HBM Join Date: Jun 2020
Location: Temecula
Posts: 122
|
I believe I used a 1 7/16 which is like 36.5 MM. A 36 did not fit mine either.
|
03-24-2021, 10:28 AM | #47 | |
Drives: 2018 2SS Camaro Join Date: Jul 2019
Location: Maine
Posts: 98
|
Quote:
Thank you for the...information! Guess...I will have to go buy...that size! Have a good one!
__________________
Let the Good Times...Roll!
|
|
|
|
Post Reply
|
Thread Tools | |
|
|